Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Three white 120mm case fans with reverse blades and ARGB infinite mirror lighting

Jungle Leopard

Jungle Leopard Prism6 PRO ARGB X3 Reverse Blade 120mm Case Fan White 3-Pack

SKU CH-AKD8-T93F3

Three 120 mm PWM fans with reverse blades, infinite-mirror ARGB lighting and hydraulic bearings deliver 61.5 CFM at 1600 RPM while staying at 30 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Reverse-3Pack

  • Infinite mirror ARGB creates depth from any angle
  • Reverse blades pull air through tight radiator fins
  • Hydraulic bearing runs at 30dBA for quiet builds
  • PWM adjusts 765–1600RPM to match thermal load
  • White 3-pack includes screws for quick case mounting

Three-Pack ARGB Case Fans

This three-pack supplies three 120mm ARGB case fans finished in white for builders who want coordinated lighting and airflow in a single purchase. Each unit uses a hydraulic bearing and a 3/4-pin PWM connector for motherboard-controlled speed curves. The reverse-blade design moves air in the opposite direction to standard fans for specialised intake or exhaust layouts.

Infinite Mirror Lighting and Hydraulic Bearing

The Prism6 PRO series features an infinite mirror effect with three-sided lens ARGB illumination that requires a 3-pin 5V addressable header on the motherboard or a compatible controller for synchronisation. Hydraulic bearings reduce friction and noise while maintaining a rated noise level of = 30dBA at full speed. Four self-tapping screws per fan are included for straightforward mounting on case panels or radiators.

PWM Speed Range and Static Pressure Limits

Fan speed ranges from 765 to 1600RPM ± 10% under PWM control, delivering 61.5CFM airflow and 2mmH2O static pressure at the top end. The 2mmH2O pressure figure limits effectiveness on dense radiator fins or restrictive mesh where higher static pressure would be needed. The 25mm thickness fits standard 120mm mounting points but may not clear ultra-slim chassis designs.

Helstu kostir

  • Infinite mirror ARGB creates depth from any angle
  • Reverse blades pull air through tight radiator fins
  • Hydraulic bearing runs at 30dBA for quiet builds
  • PWM adjusts 765–1600RPM to match thermal load
  • White 3-pack includes screws for quick case mounting

Tæknilýsing

BrandJungle Leopard
SeriesPrism6 PRO
ModelJL Prism6 PRO BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1600RPM
Air Flow61.5CFM
Air Pressure2mmH2O
Noise Level= 30dBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What does the 3 / 4 pin power connector actually limit on the Prism6 PRO fan?

The 4-pin PWM connector allows the motherboard to vary speed between 765 and 1600 RPM; the 3-pin mode runs at full voltage, so speed control is lost.

What clearance does the 120 × 120 × 25 mm frame need in a case or on a radiator?

It fits any standard 120 mm mount with 25 mm depth; allow at least 25 mm behind the frame for the reverse-blade motor housing and cable bend radius.

How is the ARGB lighting wired, and what step do builders often miss?

A separate 3-pin 5 V ARGB header must be plugged into the motherboard or a controller; forgetting this cable leaves the infinite-mirror LEDs dark.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.