NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Kingston Technology Corp.
Adds 2 GB of DDR3 1333 ECC Registered memory with CL9 latency and 1.50 V operation
This 2GB DDR3 1333 ECC Registered module is built for servers and workstations that require error-correcting, registered memory. It operates at 1.50V with CL9 latency and includes a thermal sensor for platform monitoring. The single-rank x4 organisation suits density-limited DIMM slots.
Replacing non-ECC or unbuffered DDR3 with this registered ECC module adds data-integrity protection and reduces electrical load on the memory controller. The jump is worth it when the platform mandates registered DIMMs and the workload cannot tolerate silent data corruption.
DDR3 1333 registered memory tops out at the 1333 MT/s data rate and 1.50V operation defined by the JEDEC standard for this generation. Platforms that require higher frequencies, lower voltages or unbuffered signalling cannot use these modules. Capacity per DIMM is limited by the DDR3 architecture and the registered buffer design.
| Brand | Kingston |
|---|---|
| Model | KVR1333D3S4R9S/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Features | Parity RAM Single Rank, x4 w/Therm Sen |
| Sendingarþyngd | 0.05 kg |
| Stærð sendingar | 171 × 57 × 16 mm |
The module uses the standard 240-pin DDR3 form factor, so it fits any server motherboard slot designed for DDR3 registered memory.
Align the notch with the slot key, press firmly until both retention clips click, and verify the thermal sensor contacts the motherboard pad — this last step is frequently overlooked.
Replace it if memory diagnostics report correctable ECC errors that become uncorrectable, or if the server fails to recognise the full 2GB capacity during POST.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?