NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Kingston Technology Corp.
Adds 2 GB of DDR3 1333 ECC Registered memory with CL9 latency and 1.50 V operation
This 2GB DDR3 1333 ECC Registered module is built for servers and workstations that require error-correcting, registered memory. It operates at 1.50V with CL9 latency and includes a thermal sensor for platform monitoring. The single-rank x4 organisation suits density-limited DIMM slots.
Replacing non-ECC or unbuffered DDR3 with this registered ECC module adds data-integrity protection and reduces electrical load on the memory controller. The jump is worth it when the platform mandates registered DIMMs and the workload cannot tolerate silent data corruption.
DDR3 1333 registered memory tops out at the 1333 MT/s data rate and 1.50V operation defined by the JEDEC standard for this generation. Platforms that require higher frequencies, lower voltages or unbuffered signalling cannot use these modules. Capacity per DIMM is limited by the DDR3 architecture and the registered buffer design.
| Brand | Kingston |
|---|---|
| Model | KVR1333D3S4R9S/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Features | Parity RAM Single Rank, x4 w/Therm Sen |
| Greutate la expediere | 0.05 kg |
| Dimensiunile coletului | 171 × 57 × 16 mm |
The module uses the standard 240-pin DDR3 form factor, so it fits any server motherboard slot designed for DDR3 registered memory.
Align the notch with the slot key, press firmly until both retention clips click, and verify the thermal sensor contacts the motherboard pad — this last step is frequently overlooked.
Replace it if memory diagnostics report correctable ECC errors that become uncorrectable, or if the server fails to recognise the full 2GB capacity during POST.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?