Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular laser engraver with 3.5 inch touchscreen and open 400 by 400mm work area

LONGER

LONGER Ray5 10W Upgraded laser engraver 400×400mm 3.5" touchscreen

SKU CH-N34A-7DHAM

10 W laser engraves and cuts wood to 20 mm and acrylic to 30 mm across a 400 × 400 mm bed with a 0.06 mm spot and 24 000 mm/min speed

  • Ultra-fine 0.06 mm spot for sharper detail
  • Cuts 20 mm wood and 30 mm acrylic
  • 400 × 400 mm bed handles large projects
  • 24 000 mm/min top speed boosts output
  • 5" touchscreen plus Wi-Fi, USB, TF card control

10 W laser engraver with 400 × 400 mm bed

The LONGER Ray5 is a 10 W diode laser engraver built around a 400 × 400 mm working area and a 3.5 inch colour touchscreen. It cuts 20 mm wood and 30 mm acrylic in a single pass and engraves with a 0.06 × 0.06 mm spot at up to 24 000 mm per minute. A 32-bit controller drives the motion system and handles Wi-Fi, USB, TF card and app connections for offline use.

Makers who need a large bed and simple controls

Hobbyists and small studios cutting thick wood or acrylic sheets will benefit from the generous bed and high optical power. The fixed-focus head removes manual focusing steps, and the touchscreen lets you start jobs without a computer. Users who require rotary engraving, air-assist integration or a fully enclosed cabinet should look at other platforms because those features are not included.

0.06 × 0.06 mm laser spot

The compressed laser spot measures 0.06 × 0.06 mm, which determines the finest detail the machine can reproduce. This spot size enables sharp text, clean vector lines and photo-grade dithering on wood, leather, acrylic and coated metal. If your workflow demands finer resolution than 0.06 mm, this engraver will not meet that requirement.

Helstu kostir

  • Ultra-fine 0.06 mm spot for sharper detail
  • Cuts 20 mm wood and 30 mm acrylic
  • 400 × 400 mm bed handles large projects
  • 24 000 mm/min top speed boosts output
  • 5" touchscreen plus Wi-Fi, USB, TF card control

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

Will the 400×400 mm bed on the Ray5 10W fit the clamps and honeycomb I already use with my smaller machine?

The working area is 400×400 mm; measure your existing clamps and honeycomb against those dimensions to confirm fit.

How can I confirm the 0.06×0.06 mm spot is performing correctly after setup?

Run a test grid in LaserGRBL or LightBurn and check that the 0.06 mm spot produces sharp, distinct lines at the 24000 mm/min maximum speed.

What comes in the box with the Ray5 10W and what must I source separately?

The engraver includes the 10W laser module, 3.5" touchscreen, 32-bit motherboard, Wi-Fi, USB, TF card slot and safety features; materials, air assist, rotary attachment and enclosure are sold separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.