Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Rectangular laser engraver with 3.5 inch touchscreen and open 400 by 400mm work area

LONGER

LONGER Ray5 10W Upgraded laser engraver 400×400mm 3.5" touchscreen

SKU CH-N34A-7DHAM

10 W laser engraves and cuts wood to 20 mm and acrylic to 30 mm across a 400 × 400 mm bed with a 0.06 mm spot and 24 000 mm/min speed

  • Ultra-fine 0.06 mm spot for sharper detail
  • Cuts 20 mm wood and 30 mm acrylic
  • 400 × 400 mm bed handles large projects
  • 24 000 mm/min top speed boosts output
  • 5" touchscreen plus Wi-Fi, USB, TF card control

10 W laser engraver with 400 × 400 mm bed

The LONGER Ray5 is a 10 W diode laser engraver built around a 400 × 400 mm working area and a 3.5 inch colour touchscreen. It cuts 20 mm wood and 30 mm acrylic in a single pass and engraves with a 0.06 × 0.06 mm spot at up to 24 000 mm per minute. A 32-bit controller drives the motion system and handles Wi-Fi, USB, TF card and app connections for offline use.

Makers who need a large bed and simple controls

Hobbyists and small studios cutting thick wood or acrylic sheets will benefit from the generous bed and high optical power. The fixed-focus head removes manual focusing steps, and the touchscreen lets you start jobs without a computer. Users who require rotary engraving, air-assist integration or a fully enclosed cabinet should look at other platforms because those features are not included.

0.06 × 0.06 mm laser spot

The compressed laser spot measures 0.06 × 0.06 mm, which determines the finest detail the machine can reproduce. This spot size enables sharp text, clean vector lines and photo-grade dithering on wood, leather, acrylic and coated metal. If your workflow demands finer resolution than 0.06 mm, this engraver will not meet that requirement.

Poudarki

  • Ultra-fine 0.06 mm spot for sharper detail
  • Cuts 20 mm wood and 30 mm acrylic
  • 400 × 400 mm bed handles large projects
  • 24 000 mm/min top speed boosts output
  • 5" touchscreen plus Wi-Fi, USB, TF card control

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

Will the 400×400 mm bed on the Ray5 10W fit the clamps and honeycomb I already use with my smaller machine?

The working area is 400×400 mm; measure your existing clamps and honeycomb against those dimensions to confirm fit.

How can I confirm the 0.06×0.06 mm spot is performing correctly after setup?

Run a test grid in LaserGRBL or LightBurn and check that the 0.06 mm spot produces sharp, distinct lines at the 24000 mm/min maximum speed.

What comes in the box with the Ray5 10W and what must I source separately?

The engraver includes the 10W laser module, 3.5" touchscreen, 32-bit motherboard, Wi-Fi, USB, TF card slot and safety features; materials, air assist, rotary attachment and enclosure are sold separately.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.