Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Enclosed metal power supply unit with terminal connections

Mean Well

Mean Well NES-100-24 108W 24V 4.5A power supply

SKU CH-KAEF-R6HX1

Enclosed 108 W AC-DC unit delivering 24 V at 4.5 A for low-power systems

  • TypeAT
  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

Enclosed 108 W AT power supply

This Mean Well NES-100-24 is an enclosed AC-DC switching unit that delivers 108 W at 24 V and 4.5 A. It is built for equipment that requires a single regulated 24 V rail in an AT form factor.

Suits 24 V industrial or automation gear.

The supply suits machines, controllers or test rigs that need a steady 24 V 4.5 A source. It is not designed for desktop PC motherboards, GPU power or any load that expects ATX connectors or multiple voltage rails.

108 W continuous at 24 V

The unit provides up to 108 W continuously on the 24 V output, giving headroom for motors, sensors or PLCs drawing up to 4.5 A. Loads above 108 W or currents beyond 4.5 A will exceed its rating and require a larger supply.

Helstu kostir

  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

Tæknilýsing

TypeAT

Spurningar um þessa vöru

What AC input voltage range does the NES-100-24 require to operate?

The NES-100-24 is an AT type power supply designed for standard AC mains input. Ensure your local mains voltage matches the unit's rated input range before connecting it.

Can the NES-100-24 replace an older 12 V power supply in the same chassis?

No, the NES-100-24 delivers a fixed 24 V output at 4.5 A. It cannot power equipment that requires a 12 V rail, so verify your load voltage before swapping units.

How do I confirm the NES-100-24 is delivering its rated 108 W after installation?

Measure the output terminals with a multimeter under load; you should read approximately 24 V while the connected equipment draws up to 4.5 A, confirming the 108 W rating.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.