暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Mean Well

Mean Well NES-100-24 108W 24V 4.5A power supply

SKU CH-KAEF-R6HX1

Enclosed 108 W AC-DC unit delivering 24 V at 4.5 A for low-power systems

  • TypeAT
  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

Enclosed 108 W AT power supply

This Mean Well NES-100-24 is an enclosed AC-DC switching unit that delivers 108 W at 24 V and 4.5 A. It is built for equipment that requires a single regulated 24 V rail in an AT form factor.

Suits 24 V industrial or automation gear.

The supply suits machines, controllers or test rigs that need a steady 24 V 4.5 A source. It is not designed for desktop PC motherboards, GPU power or any load that expects ATX connectors or multiple voltage rails.

108 W continuous at 24 V

The unit provides up to 108 W continuously on the 24 V output, giving headroom for motors, sensors or PLCs drawing up to 4.5 A. Loads above 108 W or currents beyond 4.5 A will exceed its rating and require a larger supply.

特長

  • Delivers 108 W for demanding loads
  • Stable 24 V output protects sensitive circuits
  • Supplies up to 4.5 A for high-current needs
  • 100 % original with verifiable serial number
  • New generation design cuts volume while boosting performance

仕様

TypeAT

この商品に関する質問

What AC input voltage range does the NES-100-24 require to operate?

The NES-100-24 is an AT type power supply designed for standard AC mains input. Ensure your local mains voltage matches the unit's rated input range before connecting it.

Can the NES-100-24 replace an older 12 V power supply in the same chassis?

No, the NES-100-24 delivers a fixed 24 V output at 4.5 A. It cannot power equipment that requires a 12 V rail, so verify your load voltage before swapping units.

How do I confirm the NES-100-24 is delivering its rated 108 W after installation?

Measure the output terminals with a multimeter under load; you should read approximately 24 V while the connected equipment draws up to 4.5 A, confirming the 108 W rating.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。