Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

MINUTEMAN

MINUTEMAN RPM1524N1LCD 24-Outlet Switched PDU 0U Vertical 15A IEC320 C20 10ft Cord

SKU CH-5GS2-FKD24 MPN RPM1524N1LCD

A switched 0U vertical PDU with 24 NEMA 5-15R outlets, 15 A IEC320 C20 input, 10 ft cord, local LCD metering and IP-addressable remote outlet control

  • TypePower Distribution Units
  • Style0U Vertical Installation
  • Certifications62368-1 Certification
  • Maximum Input Current15A
  • Input Connector(s)IEC320 C20
  • Cord Length10 ft
  • 24 switched outlets let you power-cycle each device remotely
  • Built-in LCD shows real-time amps, IP address, temperature and humidity
  • IP-addressable web interface enables outlet control and monitoring over the network
  • Input circuit breaker protects connected equipment from overload events
  • 10 ft IEC320 C20 cord feeds 15 A to the vertical 0U chassis

24-Outlet Switched PDU for Rack Management

The MINUTEMAN RPM1524N1LCD is a 0U vertical power distribution unit that provides 24 NEMA 5-15R outlets from a single IEC320 C20 input. It is built for network administrators who need to control and monitor power to multiple rack-mounted devices from one IP address. The 10 ft cord allows flexible placement within the cabinet.

Sustained Load Behaviour and Monitoring

A 15 A input circuit breaker protects the strip from continuous overload rather than relying on short-term surge handling. The local LCD reports real-time amperage, temperature and humidity so operators can spot thermal trends before they trip the breaker. Email or SNMP traps deliver threshold alerts without requiring a constant browser session.

Pre-Installation Checks

Verify that your rack power source terminates in an IEC320 C20 receptacle and that the 10 ft inlet reaches it without strain. Confirm the upstream circuit can supply 15 A continuously for the intended load. Ensure a 10/100 Base-T Ethernet drop is available for the management port and that your monitoring stack accepts SNMP v1, v2c or v3 traps.

Helstu kostir

  • 24 switched outlets let you power-cycle each device remotely
  • Built-in LCD shows real-time amps, IP address, temperature and humidity
  • IP-addressable web interface enables outlet control and monitoring over the network
  • Input circuit breaker protects connected equipment from overload events
  • 10 ft IEC320 C20 cord feeds 15 A to the vertical 0U chassis

Tæknilýsing

BrandMINUTEMAN
ModelRPM1524N1LCD
TypePower Distribution Units
Style0U Vertical Installation
Certifications62368-1 Certification
Maximum Input Current15A
Input Connector(s)IEC320 C20
Cord Length10 ft
Output Connector(s)Front Panel Receptacles: (24) 5-15 R
Maximum Output Current15A
Overload ProtectionInput Circuit Breaker Protection
FeaturesIP-addressable Remote Power Manager
Built-in Web Server to support Remote Power Management
Event Notifications via Email or SNMP Traps
Local LCD displays Amps, IP Address, Temperature and/or Humidity
Daily, Weekly, Monthly & Yearly Power Consumption Data
10/100 Base-T Ethernet Port
IPv4, IPv6 Support and SNMP Support (v1,v2c,v3)
Telnet, SSH Encryption Support
Radius Authentication
User Account for Three Different Permissions Management Systems
Alarm Notification via Email, SNMP, Syslog, LED or Audible Alarm
SSL Web Browser for Set Up and Operation
IP Address Filtering
Maximum 5,000 E
Sendingarþyngd6.35 kg
Stærð sendingar1890 × 221 × 109 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much heat and noise does the 15 A switched PDU add when running continuously in a rack?

The unit draws up to 15 A through its IEC320 C20 inlet and passes power to 24 NEMA 5-15R outlets; it has no built-in fans, so it adds no audible noise and only the minimal heat from its internal circuitry.

What network connection and cord does the buyer need to use the remote management features?

A standard CAT5 Ethernet cable for the 10/100 Base-T port and a 10 ft IEC320 C20 power cord are required to reach the upstream UPS or wall circuit.

Will the PDU’s 10/100 Ethernet port work with an older switch that only supports 10 Mbps half-duplex?

The RJ-45 port negotiates 10/100 Base-T speeds and supports IPv4, IPv6, SNMP v1/v2c/v3, SSH and Telnet, so it will communicate with legacy 10 Mbps switches without configuration changes.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.