NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Mushkin Enhanced
A 64 GB dual-channel DDR5 kit with two 32 GB modules running at 4800 MT/s and CL40 timings at 1.1 V
This Mushkin Enhanced Redline kit provides 64GB of DDR5 memory in a matched 2x32GB configuration. It targets desktop builders who need high capacity for content creation, virtualization or heavy multitasking. The modules run at the standard 4800 MT/s JEDEC speed with 1.1V operation. No extra software or manual tuning is required to reach the rated frequency.
The CAS latency, RAS-to-CAS delay and RAS precharge are all set to 40 cycles at the rated 4800 MT/s data rate. These timings remain stable during extended rendering, compilation or scientific workloads because the modules operate at the baseline JEDEC voltage. Bandwidth does not throttle when the CPU holds the memory controller at peak utilisation for long periods. The dual-rank 32GB density per stick keeps all channels populated without exceeding typical consumer platform limits.
Operating at 1.1V keeps power draw low and heat output modest even when all 64GB are active continuously. The modules use a low-profile aluminium heatspreader that dissipates heat passively without adding fan noise. Typical case airflow is sufficient to maintain safe temperatures during prolonged heavy use. The combination of standard voltage and efficient layout means the kit adds minimal load to the system power budget.
Engin birt tæknilýsing fyrir þessa vöru enn.
The modules run at the standard DDR5 voltage of 1.1 V, which helps limit power draw and heat output during continuous operation, so system fans can stay quieter.
Your motherboard needs DDR5 UDIMM slots; the kit installs in two slots and requires a platform that supports DDR5 memory.
When mixed with slower DDR5 modules, the system will run all memory at the lowest common speed and timings, so the CL40 kit will downclock to match the slower sticks.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?