OWC 256GB (2x128GB) DDR4 2933 CL21 8Rx4 ECC LRDIMM memory upgrade HP ProLiant XL270d Gen10
- 256GB (2 x 128GB)
- 288-Pin DDR4 ECC LR…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
OWC
256 GB dual-channel DDR4 3200 ECC load-reduced kit for servers, workstations and NAS systems
Capacity 256GB (2 x 128GB)
This OWC kit delivers 256GB across two 128GB DDR4 3200MHz LRDIMMs. The modules implement ECC load-reduced technology with a 4Rx4 rank structure and CL22 latency. They are built for servers, workstations and NAS systems that require registered memory and cannot accept standard unbuffered DIMMs.
Running at 1.2V, the modules draw less power per gigabyte than higher-voltage alternatives. The load-reduced buffer lowers electrical loading on the memory bus, which helps maintain signal integrity without adding active cooling requirements. No heat spreaders are fitted, so airflow across the PCB handles dissipation in typical chassis designs.
Each module uses the standard 288-pin DDR4 form factor and is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds. The kit cannot be mixed with unbuffered memory and will not work in desktop consumer platforms that lack LRDIMM support. It frees DIMM slots by concentrating 128GB per module, leaving room for further expansion where the platform allows.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4256P |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
Power down the server, open the chassis, locate the paired memory slots for dual-channel operation, align each 288-pin module's notch with the slot key, press firmly until both retention clips click, then verify the BIOS reports 256GB at 3200MHz CL22.
No scheduled maintenance is required; the modules have no heat spreader, so keep server airflow clean, and if a 128GB module ever fails ECC correction, replace the individual stick rather than the full 256GB kit.
The JEDEC-rated 1.2V voltage and CL22 latency are the first limits; under continuous heavy load the memory controller will throttle speed before exceeding the 1.2V spec, so ensure adequate cooling to sustain 3200MHz operation.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?