OWC 256GB (2x128GB) DDR4 2933 CL21 8Rx4 ECC LRDIMM memory upgrade HP ProLiant XL270d Gen10
- 256GB (2 x 128GB)
- 288-Pin DDR4 ECC LR…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
256 GB dual-channel DDR4 3200 ECC load-reduced kit for servers, workstations and NAS systems
Capacity 256GB (2 x 128GB)
This OWC kit delivers 256GB across two 128GB DDR4 3200MHz LRDIMMs. The modules implement ECC load-reduced technology with a 4Rx4 rank structure and CL22 latency. They are built for servers, workstations and NAS systems that require registered memory and cannot accept standard unbuffered DIMMs.
Running at 1.2V, the modules draw less power per gigabyte than higher-voltage alternatives. The load-reduced buffer lowers electrical loading on the memory bus, which helps maintain signal integrity without adding active cooling requirements. No heat spreaders are fitted, so airflow across the PCB handles dissipation in typical chassis designs.
Each module uses the standard 288-pin DDR4 form factor and is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds. The kit cannot be mixed with unbuffered memory and will not work in desktop consumer platforms that lack LRDIMM support. It frees DIMM slots by concentrating 128GB per module, leaving room for further expansion where the platform allows.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4256P |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, locate the paired memory slots for dual-channel operation, align each 288-pin module's notch with the slot key, press firmly until both retention clips click, then verify the BIOS reports 256GB at 3200MHz CL22.
No scheduled maintenance is required; the modules have no heat spreader, so keep server airflow clean, and if a 128GB module ever fails ECC correction, replace the individual stick rather than the full 256GB kit.
The JEDEC-rated 1.2V voltage and CL22 latency are the first limits; under continuous heavy load the memory controller will throttle speed before exceeding the 1.2V spec, so ensure adequate cooling to sustain 3200MHz operation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?