OWC 512GB (8x64GB) DDR4 2933 ECC Registered RDIMM Memory Upgrade Kit
- 512GB (8 x 64GB)
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Eight 128 GB DDR4 2933 ECC load-reduced DIMMs for HP ProLiant XL270d Gen10 servers
Capacity 1TB (8 x 128GB)
This 1TB kit contains eight 128GB DDR4 2933 ECC load-reduced DIMMs built for the HP ProLiant XL270d Gen10. The modules run at 1.2V with CL21 latency and an 8Rx4 organisation. They are not compatible with standard desktop computers and cannot be mixed with unbuffered or registered ECC memory.
Load-reduced architecture reduces electrical load on the memory controller, helping maintain signal integrity when all channels are fully populated. Backward compatibility with 2133, 2400 and 2666MHz systems allows the kit to run at the highest speed the platform supports. ECC circuitry corrects single-bit errors during continuous operation.
The modules operate at 1.2V without heat spreaders, relying on chassis airflow for cooling. Power draw scales with the number of installed DIMMs and the configured memory speed. No active cooling components are present, so acoustic output depends entirely on the server fan profile.
| Brand | OWC |
|---|---|
| Part Number | 2L9D48R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant XL270d Gen10 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each module operates at 1.2V DDR4 voltage; total system draw depends on the HP ProLiant XL270d Gen10 memory controller and workload, not on the kit alone.
The server needs free 288-pin DDR4 slots that support ECC Load Reduced memory and a BIOS that recognises 8Rx4 128GB modules; it cannot mix with unbuffered or registered DIMMs.
The kit is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, so the system will clock all populated slots to the lowest common speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?