Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Eight green DDR4 LRDIMM modules in anti-static packaging

OWC

OWC 1TB (8×128GB) DDR4 2933 CL21 ECC Load Reduced LRDIMM memory upgrade

SKU CH-P4FK-5K30C

Eight 128 GB DDR4 2933 ECC load-reduced DIMMs for HP ProLiant XL270d Gen10 servers

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 1TB (8 x 128GB)

  • 1TB total capacity across eight 128GB modules
  • DDR4 2933 speed with CL21 latency at 1.2V
  • ECC load-reduced design for server data integrity
  • Compatible with HP ProLiant XL270d Gen10 systems
  • Backward compatible with 2133, 2400 and 2666MHz speeds

Server-grade memory kit

This 1TB kit contains eight 128GB DDR4 2933 ECC load-reduced DIMMs built for the HP ProLiant XL270d Gen10. The modules run at 1.2V with CL21 latency and an 8Rx4 organisation. They are not compatible with standard desktop computers and cannot be mixed with unbuffered or registered ECC memory.

Sustained workload behaviour

Load-reduced architecture reduces electrical load on the memory controller, helping maintain signal integrity when all channels are fully populated. Backward compatibility with 2133, 2400 and 2666MHz systems allows the kit to run at the highest speed the platform supports. ECC circuitry corrects single-bit errors during continuous operation.

Thermals, noise and power

The modules operate at 1.2V without heat spreaders, relying on chassis airflow for cooling. Power draw scales with the number of installed DIMMs and the configured memory speed. No active cooling components are present, so acoustic output depends entirely on the server fan profile.

Puncte forte

  • 1TB total capacity across eight 128GB modules
  • DDR4 2933 speed with CL21 latency at 1.2V
  • ECC load-reduced design for server data integrity
  • Compatible with HP ProLiant XL270d Gen10 systems
  • Backward compatible with 2133, 2400 and 2666MHz speeds

Specificații

BrandOWC
Part Number2L9D48R41TBK
Capacity1TB (8 x 128GB)
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank8Rx4
Heat SpreaderNo
Compatible SystemHP ProLiant XL270d Gen10

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How much power does the 1.2V LRDIMM kit draw when the server runs continuously?

Each module operates at 1.2V DDR4 voltage; total system draw depends on the HP ProLiant XL270d Gen10 memory controller and workload, not on the kit alone.

What must the HP ProLiant XL270d Gen10 already have to accept this 8×128GB ECC LRDIMM kit?

The server needs free 288-pin DDR4 slots that support ECC Load Reduced memory and a BIOS that recognises 8Rx4 128GB modules; it cannot mix with unbuffered or registered DIMMs.

Will these 2933MHz modules run stably alongside existing 2400MHz DIMMs left in the XL270d Gen10?

The kit is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, so the system will clock all populated slots to the lowest common speed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.