OWC 512GB (8x64GB) DDR4 2933 ECC Registered RDIMM Memory Upgrade Kit
- 512GB (8 x 64GB)
- 288-Pin DDR4 ECC RD…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
Eight 128 GB DDR4 2933 ECC load-reduced DIMMs for HP ProLiant XL270d Gen10 servers
Capacity 1TB (8 x 128GB)
This 1TB kit contains eight 128GB DDR4 2933 ECC load-reduced DIMMs built for the HP ProLiant XL270d Gen10. The modules run at 1.2V with CL21 latency and an 8Rx4 organisation. They are not compatible with standard desktop computers and cannot be mixed with unbuffered or registered ECC memory.
Load-reduced architecture reduces electrical load on the memory controller, helping maintain signal integrity when all channels are fully populated. Backward compatibility with 2133, 2400 and 2666MHz systems allows the kit to run at the highest speed the platform supports. ECC circuitry corrects single-bit errors during continuous operation.
The modules operate at 1.2V without heat spreaders, relying on chassis airflow for cooling. Power draw scales with the number of installed DIMMs and the configured memory speed. No active cooling components are present, so acoustic output depends entirely on the server fan profile.
| Brand | OWC |
|---|---|
| Part Number | 2L9D48R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant XL270d Gen10 |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Each module operates at 1.2V DDR4 voltage; total system draw depends on the HP ProLiant XL270d Gen10 memory controller and workload, not on the kit alone.
The server needs free 288-pin DDR4 slots that support ECC Load Reduced memory and a BIOS that recognises 8Rx4 128GB modules; it cannot mix with unbuffered or registered DIMMs.
The kit is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, so the system will clock all populated slots to the lowest common speed.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?