OWC 512GB (8x64GB) DDR4 2933 ECC Registered RDIMM Memory Upgrade Kit
- 512GB (8 x 64GB)
- 288-Pin DDR4 ECC RD…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
Eight 128 GB DDR4 2933 ECC load-reduced DIMMs for HP ProLiant XL270d Gen10 servers
Capacity 1TB (8 x 128GB)
This 1TB kit contains eight 128GB DDR4 2933 ECC load-reduced DIMMs built for the HP ProLiant XL270d Gen10. The modules run at 1.2V with CL21 latency and an 8Rx4 organisation. They are not compatible with standard desktop computers and cannot be mixed with unbuffered or registered ECC memory.
Load-reduced architecture reduces electrical load on the memory controller, helping maintain signal integrity when all channels are fully populated. Backward compatibility with 2133, 2400 and 2666MHz systems allows the kit to run at the highest speed the platform supports. ECC circuitry corrects single-bit errors during continuous operation.
The modules operate at 1.2V without heat spreaders, relying on chassis airflow for cooling. Power draw scales with the number of installed DIMMs and the configured memory speed. No active cooling components are present, so acoustic output depends entirely on the server fan profile.
| Brand | OWC |
|---|---|
| Part Number | 2L9D48R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant XL270d Gen10 |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Each module operates at 1.2V DDR4 voltage; total system draw depends on the HP ProLiant XL270d Gen10 memory controller and workload, not on the kit alone.
The server needs free 288-pin DDR4 slots that support ECC Load Reduced memory and a BIOS that recognises 8Rx4 128GB modules; it cannot mix with unbuffered or registered DIMMs.
The kit is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, so the system will clock all populated slots to the lowest common speed.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?