OWC 512GB (8x64GB) DDR4 2933 ECC Registered RDIMM Memory Upgrade Kit
- 512GB (8 x 64GB)
- 288-Pin DDR4 ECC RD…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
Eight 128 GB DDR4 2933 ECC load-reduced DIMMs for HP ProLiant XL270d Gen10 servers
Capacity 1TB (8 x 128GB)
This 1TB kit contains eight 128GB DDR4 2933 ECC load-reduced DIMMs built for the HP ProLiant XL270d Gen10. The modules run at 1.2V with CL21 latency and an 8Rx4 organisation. They are not compatible with standard desktop computers and cannot be mixed with unbuffered or registered ECC memory.
Load-reduced architecture reduces electrical load on the memory controller, helping maintain signal integrity when all channels are fully populated. Backward compatibility with 2133, 2400 and 2666MHz systems allows the kit to run at the highest speed the platform supports. ECC circuitry corrects single-bit errors during continuous operation.
The modules operate at 1.2V without heat spreaders, relying on chassis airflow for cooling. Power draw scales with the number of installed DIMMs and the configured memory speed. No active cooling components are present, so acoustic output depends entirely on the server fan profile.
| Brand | OWC |
|---|---|
| Part Number | 2L9D48R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 8Rx4 |
| Heat Spreader | No |
| Compatible System | HP ProLiant XL270d Gen10 |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Each module operates at 1.2V DDR4 voltage; total system draw depends on the HP ProLiant XL270d Gen10 memory controller and workload, not on the kit alone.
The server needs free 288-pin DDR4 slots that support ECC Load Reduced memory and a BIOS that recognises 8Rx4 128GB modules; it cannot mix with unbuffered or registered DIMMs.
The kit is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, so the system will clock all populated slots to the lowest common speed.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม