OWC 1TB (8×128GB) DDR4 2933 CL21 ECC Load Reduced LRDIMM memory upgrade
- 1TB (8 x 128GB)
- 288-Pin DDR4 ECC LR…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
Eight 128 GB DDR4 2933 CL21 ECC load-reduced DIMMs totalling 1 TB for HP Synergy 480 Gen10 and 660 Gen10 servers
Capacity 1TB (8 x 128GB)
This kit provides 1TB of DDR4 memory across eight 128GB load-reduced DIMMs. It is built for HP Synergy 480 Gen10 and 660 Gen10 servers. The modules use 288-pin ECC LRDIMM form factor with 4Rx4 organisation. They are not compatible with standard desktops or unbuffered and registered ECC memory.
Load-reduced architecture reduces electrical load on the memory bus, allowing all eight modules to run at the rated 2933 MT/s without signal degradation. ECC corrects single-bit errors in real time, maintaining data integrity during continuous server workloads. The 1.2V operating voltage keeps power draw stable across extended duty cycles.
The DDR4 standard tops out at 2933 MT/s for this module class, so bandwidth cannot exceed the PC4-23400 ceiling. The kit will downclock to 2666, 2400 or 2133 MT/s if the platform requires it, but cannot run faster than the rated speed. Total capacity is fixed at 1TB with the eight supplied modules.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | HP Synergy 480 Gen10 HP Synergy 660 Gen10 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each module operates at 1.2V DDR4 voltage, which is the standard for PC4-23400 2933MHz LRDIMMs; total kit power scales with all eight modules installed.
This kit is validated for HP Synergy 480 Gen10 and 660 Gen10 compute modules; it replaces HP part numbers P19047-H21, P19047-K21, P19047-B21, P18455-B21, P11057-1A1, P11057-0A1, P11040-K21, P11040-H21 and P11040-B21.
The modules are backward compatible with 2133MHz, 2400MHz and 2666MHz speeds; the memory controller will clock all populated slots to the lowest common speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?