OWC 1TB (8×128GB) DDR4 2933 CL21 ECC Load Reduced LRDIMM memory upgrade
- 1TB (8 x 128GB)
- 288-Pin DDR4 ECC LR…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
Eight 128 GB DDR4 2933 CL21 ECC load-reduced DIMMs totalling 1 TB for HP Synergy 480 Gen10 and 660 Gen10 servers
Capacity 1TB (8 x 128GB)
This kit provides 1TB of DDR4 memory across eight 128GB load-reduced DIMMs. It is built for HP Synergy 480 Gen10 and 660 Gen10 servers. The modules use 288-pin ECC LRDIMM form factor with 4Rx4 organisation. They are not compatible with standard desktops or unbuffered and registered ECC memory.
Load-reduced architecture reduces electrical load on the memory bus, allowing all eight modules to run at the rated 2933 MT/s without signal degradation. ECC corrects single-bit errors in real time, maintaining data integrity during continuous server workloads. The 1.2V operating voltage keeps power draw stable across extended duty cycles.
The DDR4 standard tops out at 2933 MT/s for this module class, so bandwidth cannot exceed the PC4-23400 ceiling. The kit will downclock to 2666, 2400 or 2133 MT/s if the platform requires it, but cannot run faster than the rated speed. Total capacity is fixed at 1TB with the eight supplied modules.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | HP Synergy 480 Gen10 HP Synergy 660 Gen10 |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Each module operates at 1.2V DDR4 voltage, which is the standard for PC4-23400 2933MHz LRDIMMs; total kit power scales with all eight modules installed.
This kit is validated for HP Synergy 480 Gen10 and 660 Gen10 compute modules; it replaces HP part numbers P19047-H21, P19047-K21, P19047-B21, P18455-B21, P11057-1A1, P11057-0A1, P11040-K21, P11040-H21 and P11040-B21.
The modules are backward compatible with 2133MHz, 2400MHz and 2666MHz speeds; the memory controller will clock all populated slots to the lowest common speed.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?