OWC 1TB (8×128GB) DDR4 2933 CL21 ECC Load Reduced LRDIMM memory upgrade
- 1TB (8 x 128GB)
- 288-Pin DDR4 ECC LR…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
Eight 128 GB DDR4 2933 CL21 ECC load-reduced DIMMs totalling 1 TB for HP Synergy 480 Gen10 and 660 Gen10 servers
Capacity 1TB (8 x 128GB)
This kit provides 1TB of DDR4 memory across eight 128GB load-reduced DIMMs. It is built for HP Synergy 480 Gen10 and 660 Gen10 servers. The modules use 288-pin ECC LRDIMM form factor with 4Rx4 organisation. They are not compatible with standard desktops or unbuffered and registered ECC memory.
Load-reduced architecture reduces electrical load on the memory bus, allowing all eight modules to run at the rated 2933 MT/s without signal degradation. ECC corrects single-bit errors in real time, maintaining data integrity during continuous server workloads. The 1.2V operating voltage keeps power draw stable across extended duty cycles.
The DDR4 standard tops out at 2933 MT/s for this module class, so bandwidth cannot exceed the PC4-23400 ceiling. The kit will downclock to 2666, 2400 or 2133 MT/s if the platform requires it, but cannot run faster than the rated speed. Total capacity is fixed at 1TB with the eight supplied modules.
| Brand | OWC |
|---|---|
| Part Number | 2L9D44R41TBK |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Heat Spreader | No |
| Compatible System | HP Synergy 480 Gen10 HP Synergy 660 Gen10 |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Each module operates at 1.2V DDR4 voltage, which is the standard for PC4-23400 2933MHz LRDIMMs; total kit power scales with all eight modules installed.
This kit is validated for HP Synergy 480 Gen10 and 660 Gen10 compute modules; it replaces HP part numbers P19047-H21, P19047-K21, P19047-B21, P18455-B21, P11057-1A1, P11057-0A1, P11040-K21, P11040-H21 and P11040-B21.
The modules are backward compatible with 2133MHz, 2400MHz and 2666MHz speeds; the memory controller will clock all populated slots to the lowest common speed.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?