OWC 256GB (2x128GB) DDR4 2933 CL21 8Rx4 ECC LRDIMM memory upgrade HP ProLiant XL270d Gen10
- 256GB (2 x 128GB)
- 288-Pin DDR4 ECC LR…
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
OWC
256 GB dual-channel DDR4 3200 ECC load-reduced kit for servers, workstations and NAS systems
Capacity 256GB (2 x 128GB)
This OWC kit delivers 256GB across two 128GB DDR4 3200MHz LRDIMMs. The modules implement ECC load-reduced technology with a 4Rx4 rank structure and CL22 latency. They are built for servers, workstations and NAS systems that require registered memory and cannot accept standard unbuffered DIMMs.
Running at 1.2V, the modules draw less power per gigabyte than higher-voltage alternatives. The load-reduced buffer lowers electrical loading on the memory bus, which helps maintain signal integrity without adding active cooling requirements. No heat spreaders are fitted, so airflow across the PCB handles dissipation in typical chassis designs.
Each module uses the standard 288-pin DDR4 form factor and is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds. The kit cannot be mixed with unbuffered memory and will not work in desktop consumer platforms that lack LRDIMM support. It frees DIMM slots by concentrating 128GB per module, leaving room for further expansion where the platform allows.
| Brand | OWC |
|---|---|
| Part Number | 3L2D44R4256P |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR4 ECC LRDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
Power down the server, open the chassis, locate the paired memory slots for dual-channel operation, align each 288-pin module's notch with the slot key, press firmly until both retention clips click, then verify the BIOS reports 256GB at 3200MHz CL22.
No scheduled maintenance is required; the modules have no heat spreader, so keep server airflow clean, and if a 128GB module ever fails ECC correction, replace the individual stick rather than the full 256GB kit.
The JEDEC-rated 1.2V voltage and CL22 latency are the first limits; under continuous heavy load the memory controller will throttle speed before exceeding the 1.2V spec, so ensure adequate cooling to sustain 3200MHz operation.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?