Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 LRDIMM sticks with gold contacts and black chips

OWC

OWC 256GB (2×128GB) DDR4 3200 CL22 4Rx4 288-pin 1.2V ECC LRDIMM memory upgrade

SKU CH-1JZ7-3W4Z4

256 GB kit of two 128 GB DDR4 3200 CL22 ECC LRDIMM modules for HP Apollo 4200 Gen10 Plus

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCYes

Capacity 256GB (2 x 128GB)

  • ECC load-reduced design protects data integrity in servers
  • 256 GB total capacity from two 128 GB modules
  • DDR4 3200 speed with CL22 latency at 1.2 V
  • 288-pin 4Rx4 LRDIMM form factor for HP Apollo 4200 Gen10 Plus
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems

Purpose-built server kit

This OWC kit delivers 256GB of DDR4 memory in two 128GB modules for the HP Apollo 4200 Gen10 Plus. It targets administrators who need to expand capacity in that specific server platform. The modules are not compatible with standard desktop computers or consumer motherboards.

Load-reduced ECC requirement

Each module is a 288-pin LRDIMM running at DDR4 3200 with CL22 latency and 1.2V operation. The 4Rx4 organisation and load-reduced buffering are mandatory for the Apollo 4200 Gen10 Plus memory subsystem. Mixing with unbuffered or registered ECC DIMMs is not supported.

Slot-ready upgrade path

The kit plugs directly into the server's DDR4 slots and operates at 3200, 2933, 2666, 2400 or 2133 MHz depending on the system configuration. No heat spreaders are fitted, so airflow follows the chassis design. The two-module layout leaves remaining slots free for further expansion.

Kohokohdat

  • ECC load-reduced design protects data integrity in servers
  • 256 GB total capacity from two 128 GB modules
  • DDR4 3200 speed with CL22 latency at 1.2 V
  • 288-pin 4Rx4 LRDIMM form factor for HP Apollo 4200 Gen10 Plus
  • Backward compatible with 2133, 2400, 2666 and 2933 MHz systems

Tekniset tiedot

BrandOWC
Part Number3L2D44R4256P
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Heat SpreaderNo
Compatible SystemHP Apollo 4200 Gen10 Plus

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 3200 MHz rating mean once the modules are installed in an HP Apollo 4200 Gen10 Plus?

The kit runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, and will downclock automatically to 2933, 2666, 2400 or 2133 MHz if the platform requires it.

How does the load-reduced ECC interface affect usable capacity and speed in this server?

Load-reduced DIMMs buffer the data lines so the memory controller sees only one electrical load per rank, allowing 4Rx4 128 GB modules to operate at the rated 3200 MHz without signal degradation.

What physical slot and clearance requirements must the HP Apollo 4200 Gen10 Plus meet for these 288-pin LRDIMMs?

Each module uses a standard 288-pin DDR4 DIMM slot; the kit contains two 128 GB sticks with no heat spreader, so they fit in the server's regular memory bays without extra height clearance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.