Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR5 SODIMM modules, 262-pin, no heat spreader

OWC

OWC 32GB (2x16GB) DDR5 5200 CL42 262-pin 1.1V SODIMM for HP Envy 16t-h1000

SKU CH-VFWC-44Z37

32 GB DDR5-5200 CL42 dual-channel SODIMM kit for HP Envy 16t-h1000 laptops

  • Capacity32GB (2 x 16GB)
  • Type262-Pin DDR5 Non-ECC SODIMM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL42
  • Voltage1.1V
  • ECCNo

Capacity 32GB (2 x 16GB)

  • 32 GB kit boosts multitasking headroom with two 16 GB modules
  • DDR5 5200 speed raises bandwidth for faster data throughput
  • CL42 latency balances timing and stability at rated frequency
  • 1 V operation reduces power draw and heat in the laptop
  • 262-pin SODIMM fits the HP Envy 16t-h1000 slot exactly

HP Envy 16t-h1000 memory kit

This 32 GB kit contains two 16 GB DDR5 SODIMM modules rated at 5200 MT/s with CL42 timing. It is built specifically for the HP Envy 16t-h1000 laptop and operates at the standard 1.1 V JEDEC voltage. The unbuffered, non-ECC design matches the factory memory specification for that model.

JEDEC compliance and dual-channel layout

Each module follows the PC5-41600 standard, so the pair runs at the platform's native speed without manual tuning. The 1Rx8 organisation populates both slots for dual-channel bandwidth, letting the system open larger files and keep more applications active at once. No heat spreader is fitted, keeping the modules thin enough for the slim chassis.

262-pin SODIMM form factor

The 262-pin edge connector fits directly into the Envy's memory slots with no adapters required. Because the kit is validated for that exact chassis, the modules sit flush beneath the service cover and clear the cooling assembly. Builders who need ECC error correction or registered buffering should choose a different product line.

Helstu kostir

  • 32 GB kit boosts multitasking headroom with two 16 GB modules
  • DDR5 5200 speed raises bandwidth for faster data throughput
  • CL42 latency balances timing and stability at rated frequency
  • 1 V operation reduces power draw and heat in the laptop
  • 262-pin SODIMM fits the HP Envy 16t-h1000 slot exactly

Tæknilýsing

BrandOWC
Part Number5S2D51R8032P
Capacity32GB (2 x 16GB)
Type262-Pin DDR5 Non-ECC SODIMM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL42
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP Envy 16t-h1000

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 1Rx8 DDR5 modules need any firmware updates or re-seating after a BIOS change on the HP Envy 16t-h1000?

The kit is a JEDEC-standard DDR5 5200 CL42 1.1V SODIMM set tested to meet OEM specs, so no firmware updates or routine re-seating are required after a BIOS change.

What limit appears first when the 32GB DDR5 5200 kit runs sustained workloads in the Envy 16t-h1000?

The modules operate at the JEDEC DDR5 5200 CL42 1.1V rating; sustained use will hit the platform’s memory-controller thermal or power ceiling before the RAM itself reaches a hard limit.

How much heat and power do the two 16GB DDR5 1.1V sticks produce during all-day operation in the Envy 16t-h1000?

Each module runs at the standard 1.1V DDR5 voltage without a heat spreader, so power draw and heat output stay within normal JEDEC DDR5 5200 limits for a thin-and-light chassis.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.