OWC 16GB DDR5 5200 CL42 1Rx8 262-pin 1.1V SODIMM for HP OMEN 16t-wf000
- 16GB
- 262-Pin DDR5 Non-EC…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
32 GB DDR5-5200 CL42 dual-channel SODIMM kit for HP Envy 16t-h1000 laptops
This 32 GB kit contains two 16 GB DDR5 SODIMM modules rated at 5200 MT/s with CL42 timing. It is built specifically for the HP Envy 16t-h1000 laptop and operates at the standard 1.1 V JEDEC voltage. The unbuffered, non-ECC design matches the factory memory specification for that model.
Each module follows the PC5-41600 standard, so the pair runs at the platform's native speed without manual tuning. The 1Rx8 organisation populates both slots for dual-channel bandwidth, letting the system open larger files and keep more applications active at once. No heat spreader is fitted, keeping the modules thin enough for the slim chassis.
The 262-pin edge connector fits directly into the Envy's memory slots with no adapters required. Because the kit is validated for that exact chassis, the modules sit flush beneath the service cover and clear the cooling assembly. Builders who need ECC error correction or registered buffering should choose a different product line.
| Brand | OWC |
|---|---|
| Part Number | 5S2D51R8032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 262-Pin DDR5 Non-ECC SODIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP Envy 16t-h1000 |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
The kit is a JEDEC-standard DDR5 5200 CL42 1.1V SODIMM set tested to meet OEM specs, so no firmware updates or routine re-seating are required after a BIOS change.
The modules operate at the JEDEC DDR5 5200 CL42 1.1V rating; sustained use will hit the platform’s memory-controller thermal or power ceiling before the RAM itself reaches a hard limit.
Each module runs at the standard 1.1V DDR5 voltage without a heat spreader, so power draw and heat output stay within normal JEDEC DDR5 5200 limits for a thin-and-light chassis.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?