OWC 16GB DDR5 5200 CL42 1Rx8 262-pin 1.1V SODIMM for HP OMEN 16t-wf000
- 16GB
- 262-Pin DDR5 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
32 GB DDR5-5200 CL42 dual-channel SODIMM kit for HP Envy 16t-h1000 laptops
This 32 GB kit contains two 16 GB DDR5 SODIMM modules rated at 5200 MT/s with CL42 timing. It is built specifically for the HP Envy 16t-h1000 laptop and operates at the standard 1.1 V JEDEC voltage. The unbuffered, non-ECC design matches the factory memory specification for that model.
Each module follows the PC5-41600 standard, so the pair runs at the platform's native speed without manual tuning. The 1Rx8 organisation populates both slots for dual-channel bandwidth, letting the system open larger files and keep more applications active at once. No heat spreader is fitted, keeping the modules thin enough for the slim chassis.
The 262-pin edge connector fits directly into the Envy's memory slots with no adapters required. Because the kit is validated for that exact chassis, the modules sit flush beneath the service cover and clear the cooling assembly. Builders who need ECC error correction or registered buffering should choose a different product line.
| Brand | OWC |
|---|---|
| Part Number | 5S2D51R8032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 262-Pin DDR5 Non-ECC SODIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP Envy 16t-h1000 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The kit is a JEDEC-standard DDR5 5200 CL42 1.1V SODIMM set tested to meet OEM specs, so no firmware updates or routine re-seating are required after a BIOS change.
The modules operate at the JEDEC DDR5 5200 CL42 1.1V rating; sustained use will hit the platform’s memory-controller thermal or power ceiling before the RAM itself reaches a hard limit.
Each module runs at the standard 1.1V DDR5 voltage without a heat spreader, so power draw and heat output stay within normal JEDEC DDR5 5200 limits for a thin-and-light chassis.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟