OWC 16GB DDR5 5200 CL42 1Rx8 262-pin 1.1V SODIMM for HP OMEN 16t-wf000
- 16GB
- 262-Pin DDR5 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
32 GB DDR5-5200 CL42 dual-channel SODIMM kit for HP Envy 16t-h1000 laptops
This 32 GB kit contains two 16 GB DDR5 SODIMM modules rated at 5200 MT/s with CL42 timing. It is built specifically for the HP Envy 16t-h1000 laptop and operates at the standard 1.1 V JEDEC voltage. The unbuffered, non-ECC design matches the factory memory specification for that model.
Each module follows the PC5-41600 standard, so the pair runs at the platform's native speed without manual tuning. The 1Rx8 organisation populates both slots for dual-channel bandwidth, letting the system open larger files and keep more applications active at once. No heat spreader is fitted, keeping the modules thin enough for the slim chassis.
The 262-pin edge connector fits directly into the Envy's memory slots with no adapters required. Because the kit is validated for that exact chassis, the modules sit flush beneath the service cover and clear the cooling assembly. Builders who need ECC error correction or registered buffering should choose a different product line.
| Brand | OWC |
|---|---|
| Part Number | 5S2D51R8032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 262-Pin DDR5 Non-ECC SODIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP Envy 16t-h1000 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit is a JEDEC-standard DDR5 5200 CL42 1.1V SODIMM set tested to meet OEM specs, so no firmware updates or routine re-seating are required after a BIOS change.
The modules operate at the JEDEC DDR5 5200 CL42 1.1V rating; sustained use will hit the platform’s memory-controller thermal or power ceiling before the RAM itself reaches a hard limit.
Each module runs at the standard 1.1V DDR5 voltage without a heat spreader, so power draw and heat output stay within normal JEDEC DDR5 5200 limits for a thin-and-light chassis.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?