OWC 32GB DDR4 2400 CL17 2Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
OWC
64GB dual-channel ECC registered DDR4-2400 kit for Cisco UCS B420 M4 and C460 M4 servers
Capacity 64GB (2 x 32GB)
This OWC kit provides 64GB of DDR4 2400 memory using two 32GB registered DIMMs. It is built for Cisco UCS B420 M4 and C460 M4 servers that require ECC registered modules. The memory operates at 1.2V with CL17 latency and a 2Rx4 rank configuration. It will not work in standard desktop computers or alongside unbuffered or load-reduced DIMMs.
These modules have no heat spreaders and rely on server chassis airflow for cooling. Registered ECC DDR4 at 1.2V draws modest power per DIMM under typical server workloads. Acoustic output is determined by the host system fans rather than the memory itself.
The kit replaces Cisco part numbers HXMR1X322RVA, HXSPM32RVA, UCSMR1X322RVA, UCSMR1X322RVARF and UCSMR1X322RVAS. Using matched OWC modules simplifies qualification and avoids mixing registered with unbuffered or load-reduced memory.
| Brand | OWC |
|---|---|
| Part Number | 2R4D42R4064P |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B420 M4 Cisco UCS C460 M4 (DDR4) |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
Power down the server, open the chassis, align each 288-pin module with the keyed slot and press firmly until the ejector tabs lock; the step often missed is populating the correct channel slots in the order specified by the Cisco UCS B420 M4 memory population guide so that both 32 GB modules run as a matched pair.
The modules themselves require no periodic maintenance; replacement is only needed if a DIMM fails or if you upgrade capacity beyond the 64 GB kit, at which point you must add identical 2Rx4 PC4-19200 CL17 1.2 V registered modules to keep ECC and registered operation consistent.
The DDR4 2400 CL17 1.2 V specification sets the maximum sustained data rate and latency; under continuous load the memory controller will throttle to stay within the JEDEC-defined thermal and timing envelope of the PC4-19200 modules.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?