OWC 32GB DDR4 2400 CL17 2Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade
- 32GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
64GB dual-channel ECC registered DDR4-2400 kit for Cisco UCS B420 M4 and C460 M4 servers
Capacity 64GB (2 x 32GB)
This OWC kit provides 64GB of DDR4 2400 memory using two 32GB registered DIMMs. It is built for Cisco UCS B420 M4 and C460 M4 servers that require ECC registered modules. The memory operates at 1.2V with CL17 latency and a 2Rx4 rank configuration. It will not work in standard desktop computers or alongside unbuffered or load-reduced DIMMs.
These modules have no heat spreaders and rely on server chassis airflow for cooling. Registered ECC DDR4 at 1.2V draws modest power per DIMM under typical server workloads. Acoustic output is determined by the host system fans rather than the memory itself.
The kit replaces Cisco part numbers HXMR1X322RVA, HXSPM32RVA, UCSMR1X322RVA, UCSMR1X322RVARF and UCSMR1X322RVAS. Using matched OWC modules simplifies qualification and avoids mixing registered with unbuffered or load-reduced memory.
| Brand | OWC |
|---|---|
| Part Number | 2R4D42R4064P |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B420 M4 Cisco UCS C460 M4 (DDR4) |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align each 288-pin module with the keyed slot and press firmly until the ejector tabs lock; the step often missed is populating the correct channel slots in the order specified by the Cisco UCS B420 M4 memory population guide so that both 32 GB modules run as a matched pair.
The modules themselves require no periodic maintenance; replacement is only needed if a DIMM fails or if you upgrade capacity beyond the 64 GB kit, at which point you must add identical 2Rx4 PC4-19200 CL17 1.2 V registered modules to keep ECC and registered operation consistent.
The DDR4 2400 CL17 1.2 V specification sets the maximum sustained data rate and latency; under continuous load the memory controller will throttle to stay within the JEDEC-defined thermal and timing envelope of the PC4-19200 modules.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?