OWC 16GB DDR4 2400 CL17 ECC Registered RDIMM 288-pin 1.2V Cisco UCS B260 M4 B460 M4 memory upgrade
- 16GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
ECC registered DDR4 kit adds 32 GB across two 16 GB modules at 2400 MT/s CL17 for Cisco UCS B260 M4 and B460 M4 servers
Capacity 32GB (2 x 16GB)
This 32 GB kit contains two 16 GB DDR4 2400 CL17 ECC registered RDIMMs built for Cisco UCS B260 M4 E7 v4 and B460 M4 E7 v4 servers. The modules run at 1.2 V and use a 1Rx4 organisation to provide error correction and signal buffering for multi-socket workloads. They replace Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG. Desktop or consumer platforms cannot use registered ECC memory.
Operating at the standard 1.2 V DDR4 voltage keeps power draw low for dense server configurations. No heat spreader is fitted, so airflow through the chassis manages module temperatures directly. The registered design reduces electrical load on the memory controller, helping maintain stable operation under sustained throughput.
Adding 32 GB of registered ECC capacity extends the usable life of the supported Cisco UCS platforms or reduces cost when populating new build slots. JEDEC and RoHS compliance ensures the modules meet industry specifications for server deployment. The kit is not compatible with unbuffered or load-reduced ECC memory types.
| Brand | OWC |
|---|---|
| Part Number | 2R4D41R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B260 M4 E7 v4 Cisco UCS B460 M4 E7 v4 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align the notch on each 288-pin DDR4 module with the slot key, press firmly until both latches click, then verify in BIOS that all 32 GB are recognised at 2400 MHz; the step often missed is seating both latches fully so the registered buffer makes proper contact.
The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server air filters clean; replacement is only required if a DIMM fails ECC correction or the server is upgraded beyond DDR4 2400.
The CAS latency of CL17 at DDR4 2400 sets the timing ceiling, so memory bandwidth and latency plateau there before thermal or voltage limits become a factor.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?