OWC 16GB DDR4 2400 CL17 ECC Registered RDIMM 288-pin 1.2V Cisco UCS B260 M4 B460 M4 memory upgrade
- 16GB
- 288-Pin DDR4 ECC RD…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
OWC
ECC registered DDR4 kit adds 32 GB across two 16 GB modules at 2400 MT/s CL17 for Cisco UCS B260 M4 and B460 M4 servers
Capacity 32GB (2 x 16GB)
This 32 GB kit contains two 16 GB DDR4 2400 CL17 ECC registered RDIMMs built for Cisco UCS B260 M4 E7 v4 and B460 M4 E7 v4 servers. The modules run at 1.2 V and use a 1Rx4 organisation to provide error correction and signal buffering for multi-socket workloads. They replace Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG. Desktop or consumer platforms cannot use registered ECC memory.
Operating at the standard 1.2 V DDR4 voltage keeps power draw low for dense server configurations. No heat spreader is fitted, so airflow through the chassis manages module temperatures directly. The registered design reduces electrical load on the memory controller, helping maintain stable operation under sustained throughput.
Adding 32 GB of registered ECC capacity extends the usable life of the supported Cisco UCS platforms or reduces cost when populating new build slots. JEDEC and RoHS compliance ensures the modules meet industry specifications for server deployment. The kit is not compatible with unbuffered or load-reduced ECC memory types.
| Brand | OWC |
|---|---|
| Part Number | 2R4D41R4032P |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B260 M4 E7 v4 Cisco UCS B460 M4 E7 v4 |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Power down the server, open the chassis, align the notch on each 288-pin DDR4 module with the slot key, press firmly until both latches click, then verify in BIOS that all 32 GB are recognised at 2400 MHz; the step often missed is seating both latches fully so the registered buffer makes proper contact.
The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server air filters clean; replacement is only required if a DIMM fails ECC correction or the server is upgraded beyond DDR4 2400.
The CAS latency of CL17 at DDR4 2400 sets the timing ceiling, so memory bandwidth and latency plateau there before thermal or voltage limits become a factor.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?