我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

OWC

OWC 32GB (2x16GB) DDR4 2400 CL17 288-pin ECC Registered RDIMM 1Rx4 1.2V memory upgrade

SKU CH-YNXY-EHC68

ECC registered DDR4 kit adds 32 GB across two 16 GB modules at 2400 MT/s CL17 for Cisco UCS B260 M4 and B460 M4 servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 32 GB kit expands capacity for demanding workloads
  • DDR4 2400 CL17 speed matches Cisco UCS B260 M4 and B460 M4 specs
  • 2 V operation reduces power draw and heat
  • Two 16 GB 1Rx4 modules enable dual-channel performance

Server memory kit

This 32 GB kit contains two 16 GB DDR4 2400 CL17 ECC registered RDIMMs built for Cisco UCS B260 M4 E7 v4 and B460 M4 E7 v4 servers. The modules run at 1.2 V and use a 1Rx4 organisation to provide error correction and signal buffering for multi-socket workloads. They replace Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG. Desktop or consumer platforms cannot use registered ECC memory.

Thermals and power

Operating at the standard 1.2 V DDR4 voltage keeps power draw low for dense server configurations. No heat spreader is fitted, so airflow through the chassis manages module temperatures directly. The registered design reduces electrical load on the memory controller, helping maintain stable operation under sustained throughput.

What the kit changes

Adding 32 GB of registered ECC capacity extends the usable life of the supported Cisco UCS platforms or reduces cost when populating new build slots. JEDEC and RoHS compliance ensures the modules meet industry specifications for server deployment. The kit is not compatible with unbuffered or load-reduced ECC memory types.

商品特色

  • ECC registered design protects data integrity in servers
  • 32 GB kit expands capacity for demanding workloads
  • DDR4 2400 CL17 speed matches Cisco UCS B260 M4 and B460 M4 specs
  • 2 V operation reduces power draw and heat
  • Two 16 GB 1Rx4 modules enable dual-channel performance

商品規格

BrandOWC
Part Number2R4D41R4032P
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B260 M4 E7 v4
Cisco UCS B460 M4 E7 v4

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 288-pin RDIMMs in a Cisco UCS B260 M4 and what step is often missed?

Power down the server, open the chassis, align the notch on each 288-pin DDR4 module with the slot key, press firmly until both latches click, then verify in BIOS that all 32 GB are recognised at 2400 MHz; the step often missed is seating both latches fully so the registered buffer makes proper contact.

What maintenance or replacement will the ECC registered kit need over its service life?

The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server air filters clean; replacement is only required if a DIMM fails ECC correction or the server is upgraded beyond DDR4 2400.

What limit appears first when the 1Rx4 RDIMMs run sustained workloads at 1.2 V?

The CAS latency of CL17 at DDR4 2400 sets the timing ceiling, so memory bandwidth and latency plateau there before thermal or voltage limits become a factor.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。