We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR4 ECC registered DIMMs in anti-static tray

OWC

OWC 128GB (8x16GB) DDR4 2400 CL17 ECC Registered RDIMM memory upgrade

SKU CH-CA8T-9AB1R

128 GB DDR4-2400 CL17 ECC registered kit with eight 16 GB RDIMMs for Cisco UCS B260 M4 and B460 M4 servers

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 128GB (8 x 16GB)

  • ECC registered design protects data integrity in servers
  • 128 GB total capacity across eight 16 GB modules
  • DDR4 2400 CL17 at 1.2 V for efficient performance
  • 288-pin RDIMM form factor fits Cisco UCS B260 M4 and B460 M4
  • Replaces Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG

Server-grade memory kit

This OWC kit supplies 128GB of DDR4 ECC Registered memory across eight 16GB modules. It is built for Cisco UCS B260 M4 E7 v4 and B460 M4 E7 v4 servers that require registered DIMMs with error correction. Standard desktop boards cannot use this memory.

288-pin registered DIMMs

Each module uses the 288-pin DDR4 form factor and runs at 1.2V with a CL17 latency at 2400 MT/s. The registered design places a buffer on the command bus, which reduces electrical load on the memory controller in multi-DIMM server configurations. No heat spreaders are fitted, so airflow in the chassis must be sufficient for dense populations.

Eight-module population kit

The package delivers a matched set of eight 16GB sticks, allowing a single-order fill of eight slots in the supported Cisco platforms. It replaces Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG. Mixing these registered modules with unbuffered or load-reduced ECC memory is not supported.

Highlights

  • ECC registered design protects data integrity in servers
  • 128 GB total capacity across eight 16 GB modules
  • DDR4 2400 CL17 at 1.2 V for efficient performance
  • 288-pin RDIMM form factor fits Cisco UCS B260 M4 and B460 M4
  • Replaces Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG

Specifications

BrandOWC
Part Number2R4D41R4128K
Capacity128GB (8 x 16GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B260 M4 E7 v4
Cisco UCS B460 M4 E7 v4

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What speed does the DDR4 2400 PC4-19200 interface actually run at in this kit?

Each module operates at 2400 MHz with a PC4-19200 data rate and CL17 latency.

What physical slot and pin count do these 288-pin RDIMMs require?

They need a standard 288-pin DDR4 DIMM slot on a Cisco UCS B260 M4 E7 v4 or B460 M4 E7 v4 motherboard.

How are the eight 16 GB registered DIMMs installed, and what step is often missed?

Populate all eight slots following the server's channel guide; the common mistake is mixing these registered modules with unbuffered or load-reduced memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.