OWC 16GB DDR4 2400 CL17 1Rx4 288-pin ECC Registered RDIMM memory upgrade
- 16GB
- 288-Pin DDR4 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB DDR4 2400 CL17 ECC registered RDIMM for Cisco UCS B260 M4 and B460 M4 servers
This 16GB DDR4 2400 CL17 ECC Registered RDIMM is built for Cisco UCS B260 M4 E7 v4 and B460 M4 E7 v4 servers. It provides a direct 288-pin memory upgrade for workstations and servers that require registered error-correcting modules. Standard desktop systems cannot use this memory.
The module runs at the standard DDR4 voltage of 1.2V without a heat spreader. Registered buffering reduces electrical load on the memory controller, helping to keep power draw low during sustained server workloads. Passive cooling relies on system airflow.
This single 16GB 1Rx4 DIMM replaces those Cisco part numbers to extend the life of existing infrastructure or to add capacity when building a new configuration. The upgrade is worthwhile when your compatible server needs more registered ECC memory and you want a JEDEC-compliant module tested for reliability. It will not work with unbuffered or load-reduced DIMM types.
| Brand | OWC |
|---|---|
| Part Number | 2R4D41R416GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Cisco UCS B260 M4 E7 v4 Cisco UCS B460 M4 E7 v4 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, locate the DIMM slots for the CPU you are populating, align the notch on the 288-pin module with the slot key, and press firmly until the ejector tabs lock. The step people get wrong is mixing this ECC Registered RDIMM with unbuffered or load-reduced memory, which the system will not support.
No routine maintenance is required for the module itself. Keep the server air filters clean and verify fan operation so the 1.2V DIMM stays within thermal limits. Replacement is only needed if a memory error appears in the system logs or a diagnostic test flags the specific 16GB stick.
The first limit is the memory controller’s maximum supported capacity per channel and the total rank count per channel. Because this is a 1Rx4 Registered DIMM, you hit the rank or capacity ceiling before the CL17 latency or 2400MHz speed becomes a bottleneck.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?