暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold edge connector and black memory chips

OWC

OWC 16GB DDR4 2400 CL17 ECC Registered RDIMM 288-pin 1.2V Cisco UCS B260 M4 B460 M4 memory upgrade

SKU CH-GSD6-QMX21

16 GB DDR4 2400 CL17 ECC registered RDIMM for Cisco UCS B260 M4 and B460 M4 servers

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in servers
  • 16 GB DDR4 2400 MHz CL17 expands Cisco UCS B260 M4 and B460 M4 capacity
  • 2 V operation reduces power draw in dense configurations
  • Single 1Rx4 rank simplifies population rules for registered DIMM slots
  • Replaces Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG

16GB DDR4 ECC RDIMM for Cisco UCS

This 16GB DDR4 2400 CL17 ECC Registered RDIMM is built for Cisco UCS B260 M4 E7 v4 and B460 M4 E7 v4 servers. It provides a direct 288-pin memory upgrade for workstations and servers that require registered error-correcting modules. Standard desktop systems cannot use this memory.

Thermals and power in normal operation

The module runs at the standard DDR4 voltage of 1.2V without a heat spreader. Registered buffering reduces electrical load on the memory controller, helping to keep power draw low during sustained server workloads. Passive cooling relies on system airflow.

Replaces Cisco UCSMR1X161RVA and UCSMR1X161RVG

This single 16GB 1Rx4 DIMM replaces those Cisco part numbers to extend the life of existing infrastructure or to add capacity when building a new configuration. The upgrade is worthwhile when your compatible server needs more registered ECC memory and you want a JEDEC-compliant module tested for reliability. It will not work with unbuffered or load-reduced DIMM types.

特長

  • ECC registered design protects data integrity in servers
  • 16 GB DDR4 2400 MHz CL17 expands Cisco UCS B260 M4 and B460 M4 capacity
  • 2 V operation reduces power draw in dense configurations
  • Single 1Rx4 rank simplifies population rules for registered DIMM slots
  • Replaces Cisco part numbers UCSMR1X161RVA and UCSMR1X161RVG

仕様

BrandOWC
Part Number2R4D41R416GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemCisco UCS B260 M4 E7 v4
Cisco UCS B460 M4 E7 v4

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 288-pin DDR4 RDIMM into a Cisco UCS B260 M4 E7 v4 server, and what is the common mistake?

Power down the server, open the chassis, locate the DIMM slots for the CPU you are populating, align the notch on the 288-pin module with the slot key, and press firmly until the ejector tabs lock. The step people get wrong is mixing this ECC Registered RDIMM with unbuffered or load-reduced memory, which the system will not support.

What maintenance or replacement will this 16GB 1Rx4 module need later?

No routine maintenance is required for the module itself. Keep the server air filters clean and verify fan operation so the 1.2V DIMM stays within thermal limits. Replacement is only needed if a memory error appears in the system logs or a diagnostic test flags the specific 16GB stick.

What limit appears first when this CL17 2400MHz RDIMM runs under sustained load?

The first limit is the memory controller’s maximum supported capacity per channel and the total rank count per channel. Because this is a 1Rx4 Registered DIMM, you hit the rank or capacity ceiling before the CL17 latency or 2400MHz speed becomes a bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。