Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular E1.S 9.5mm enterprise SSD with gold edge connector and silver label

Solidigm

Solidigm D7-PS1010 3.84TB E1.S 9.5mm PCIe 5.0 x4 enterprise SSD SB5PHU7X038TOP1

SKU CH-MYEK-20NMN MPN SB5PHU7X038TOP1

3.84TB enterprise SSD in E1.S 9.5mm form factor with PCIe 5.0 x4 interface and Opal security

  • Form FactorE1.S 9.5mm
  • Capacity3.84TB
  • Memory ComponentsTLC
  • InterfacePCI-Express 5.0 x4
  • SecurityOpal

Option 3.84TB E1.S 9.5mm Opal

Sjá 20 stillingar til viðbótar
  • E1.S 9.5mm form factor fits dense server bays
  • 84TB TLC capacity stores large enterprise datasets
  • PCIe 5.0 x4 interface delivers high-throughput data transfer
  • Opal security protects data at rest with hardware encryption
  • New condition ensures full manufacturer specification and reliability

Enterprise SSD for PCIe 5.0 servers

The Solidigm D7-PS1010 is a 3.84TB enterprise solid-state drive built for PCIe 5.0 x4 server platforms. It uses an E1.S 9.5mm form factor and TLC memory components. The drive targets data-centre workloads that require high-capacity storage in a compact, hot-pluggable design.

Thermals noise and power

The E1.S 9.5mm form factor is designed for direct airflow in server chassis, allowing thermal management through system-level cooling. Power draw scales with PCIe 5.0 x4 activity and the TLC memory characteristics during read and write operations. Acoustic output is negligible as the drive has no moving parts.

Opal security and single pack

Hardware-based Opal encryption secures data at rest without host software overhead. The single-pack delivery provides one drive ready for immediate installation in compatible E1.S bays. No additional cables, brackets or management utilities are included in the package.

Helstu kostir

  • E1.S 9.5mm form factor fits dense server bays
  • 84TB TLC capacity stores large enterprise datasets
  • PCIe 5.0 x4 interface delivers high-throughput data transfer
  • Opal security protects data at rest with hardware encryption
  • New condition ensures full manufacturer specification and reliability

Tæknilýsing

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PHU7X038TOP1
Form FactorE1.S 9.5mm
Capacity3.84TB
Memory ComponentsTLC
InterfacePCI-Express 5.0 x4
SecurityOpal
Sendingarþyngd0.12 kg
Stærð sendingar140 × 110 × 16 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the E1.S 9.5mm drive in a PCIe 5.0 x4 server slot, and what step is often missed?

Slide the E1.S 9.5mm module into the hot-plug bay until the latch clicks, then secure the retention screw; the step often missed is tightening that screw, which ensures full PCIe 5.0 x4 electrical contact.

What maintenance or replacement will the 3.84TB TLC drive need later?

The TLC NAND has a finite write endurance; once the device reaches its rated terabytes-written limit the drive should be replaced, and firmware updates should be applied whenever the vendor releases them.

What limit appears first on the D7-PS1010 during sustained heavy writes?

Under continuous write workloads the controller will throttle performance to manage temperature and protect the TLC NAND, so thermal throttling is the first limit encountered.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.