Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular E1.S enterprise SSD, 9.5mm thick, green PCB with silver label

Solidigm

Solidigm D7-PS1010 7.68TB E1.S 9.5mm PCIe 5.0 x4 enterprise SSD SB5PHU7X076TOP1

SKU CH-Z0D3-MJ5HM MPN SB5PHU7X076TOP1

E1.S 9.5mm enterprise SSD with 7.68TB TLC storage and PCIe 5.0 x4 interface

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory ComponentsTLC
  • InterfacePCI-Express 5.0 x4
  • SecurityOpal

Option 7.68TB E1.S 9.5mm Opal

Sjá 20 stillingar til viðbótar
  • High-capacity 7.68TB storage for data-intensive workloads
  • PCIe 5.0 x4 interface enables high-speed data transfer
  • E1.S 9.5mm form factor fits dense server chassis
  • TLC memory components balance performance and endurance
  • Opal security protects sensitive data at rest

Solidigm D7-PS1010 7.68TB E1.S drive

The Solidigm D7-PS1010 is a 7.68TB enterprise solid-state drive built in the E1.S 9.5mm form factor. It connects through a PCI-Express 5.0 x4 interface and uses TLC memory components. The drive includes Opal security features for data protection. It is designed for internal server and data-centre deployments.

Suited for high-capacity server storage

This drive suits administrators adding high-capacity flash storage to compatible E1.S bays that support PCIe 5.0 x4 signalling. Buyers who need a different physical form factor such as U.2 or M.2 should look at other products. It is not for systems lacking an E1.S 9.5mm slot or PCIe 5.0 support. Workloads requiring alternative security standards may need a different model.

Verify E1.S slot and PCIe generation

Before ordering, confirm the server chassis provides an E1.S 9.5mm drive bay with the correct connector keying. Check that the backplane or motherboard routes PCI-Express 5.0 x4 lanes to that slot. Ensure the system BIOS or firmware recognises Opal-enabled drives. Validate cooling airflow meets the drive’s thermal requirements.

Helstu kostir

  • High-capacity 7.68TB storage for data-intensive workloads
  • PCIe 5.0 x4 interface enables high-speed data transfer
  • E1.S 9.5mm form factor fits dense server chassis
  • TLC memory components balance performance and endurance
  • Opal security protects sensitive data at rest

Tæknilýsing

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PHU7X076TOP1
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory ComponentsTLC
InterfacePCI-Express 5.0 x4
SecurityOpal
Sendingarþyngd0.12 kg
Stærð sendingar140 × 110 × 16 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What server chassis or backplane accepts the E1.S 9.5mm form factor of this D7-PS1010?

You need a system with an E1.S 9.5mm drive bay and a PCIe 5.0 x4 electrical connection to install this 7.68TB drive.

Will the PCIe 5.0 x4 interface of this SB5PHU7X076TOP1 negotiate down to PCIe 4.0 in my existing server?

Yes, the PCIe 5.0 x4 interface is backward compatible and will operate at PCIe 4.0 speeds when installed in a PCIe 4.0 slot.

How can I verify the Opal security feature is active on the 7.68TB D7-PS1010 after installation?

Use a compatible management tool to query the drive's security status and confirm the Opal lock state shows as enabled.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.