Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular E1.S enterprise SSD, 9.5mm thick, green PCB with silver label

Solidigm

Solidigm D7-PS1010 7.68TB E1.S 9.5mm PCIe 5.0 x4 enterprise SSD SB5PHU7X076TOP1

SKU CH-Z0D3-MJ5HM MPN SB5PHU7X076TOP1

E1.S 9.5mm enterprise SSD with 7.68TB TLC storage and PCIe 5.0 x4 interface

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory ComponentsTLC
  • InterfacePCI-Express 5.0 x4
  • SecurityOpal

Option 7.68TB E1.S 9.5mm Opal

Zobrazit dalších 20 konfigurací
  • High-capacity 7.68TB storage for data-intensive workloads
  • PCIe 5.0 x4 interface enables high-speed data transfer
  • E1.S 9.5mm form factor fits dense server chassis
  • TLC memory components balance performance and endurance
  • Opal security protects sensitive data at rest

Solidigm D7-PS1010 7.68TB E1.S drive

The Solidigm D7-PS1010 is a 7.68TB enterprise solid-state drive built in the E1.S 9.5mm form factor. It connects through a PCI-Express 5.0 x4 interface and uses TLC memory components. The drive includes Opal security features for data protection. It is designed for internal server and data-centre deployments.

Suited for high-capacity server storage

This drive suits administrators adding high-capacity flash storage to compatible E1.S bays that support PCIe 5.0 x4 signalling. Buyers who need a different physical form factor such as U.2 or M.2 should look at other products. It is not for systems lacking an E1.S 9.5mm slot or PCIe 5.0 support. Workloads requiring alternative security standards may need a different model.

Verify E1.S slot and PCIe generation

Before ordering, confirm the server chassis provides an E1.S 9.5mm drive bay with the correct connector keying. Check that the backplane or motherboard routes PCI-Express 5.0 x4 lanes to that slot. Ensure the system BIOS or firmware recognises Opal-enabled drives. Validate cooling airflow meets the drive’s thermal requirements.

Přednosti

  • High-capacity 7.68TB storage for data-intensive workloads
  • PCIe 5.0 x4 interface enables high-speed data transfer
  • E1.S 9.5mm form factor fits dense server chassis
  • TLC memory components balance performance and endurance
  • Opal security protects sensitive data at rest

Specifikace

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PHU7X076TOP1
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory ComponentsTLC
InterfacePCI-Express 5.0 x4
SecurityOpal
Přepravní hmotnost0.12 kg
Rozměry balení140 × 110 × 16 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What server chassis or backplane accepts the E1.S 9.5mm form factor of this D7-PS1010?

You need a system with an E1.S 9.5mm drive bay and a PCIe 5.0 x4 electrical connection to install this 7.68TB drive.

Will the PCIe 5.0 x4 interface of this SB5PHU7X076TOP1 negotiate down to PCIe 4.0 in my existing server?

Yes, the PCIe 5.0 x4 interface is backward compatible and will operate at PCIe 4.0 speeds when installed in a PCIe 4.0 slot.

How can I verify the Opal security feature is active on the 7.68TB D7-PS1010 after installation?

Use a compatible management tool to query the drive's security status and confirm the Opal lock state shows as enabled.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.