Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
E1.S 15mm enterprise SSD with green circuit board and gold edge connector

Solidigm

Solidigm SB5PHV7X038TOP1 D7-PS1010 3.84TB E1.S 15mm PCIe 5.0 x4 enterprise SSD

SKU CH-NHFT-6CEMN MPN SB5PHV7X038TOP1

3.84 TB enterprise SSD in E1.S 15 mm form factor with PCIe 5.0 x4 interface and TLC memory

  • Form FactorE1.S 15mm
  • Capacity3.84TB
  • Memory ComponentsTLC
  • InterfacePCI-Express 5.0 x4
  • SecurityOpal

Option 3.84TB E1.S 15mm Opal

Sjá 20 stillingar til viðbótar
  • 84TB capacity supports dense server workloads
  • E1.S 15mm form factor fits high-density chassis
  • PCIe 5.0 x4 interface enables fast data transfer
  • TLC memory components balance performance and endurance
  • Opal security protects stored data

Solidigm D7-PS1010 3.84TB E1.S enterprise SSD

The Solidigm D7-PS1010 is a 3.84TB enterprise solid-state drive built in the E1.S 15mm form factor. It connects through a PCI-Express 5.0 x4 interface and uses TLC memory components with Opal security support. This drive is intended for data-centre and server deployments that require high-capacity storage in a compact, hot-pluggable design.

Suited for dense server storage.

This SSD suits administrators building high-density storage arrays in 1U or 2U servers that accept E1.S 15mm drives. It is not for desktop PCs, workstations or laptops that only provide M.2 slots or 2.5-inch U.2/U.3 bays. Buyers who need a boot drive for a consumer motherboard or an external portable drive should look at other form factors.

PCIe 5.0 x4 interface decides platform compatibility

The single specification that determines fit is the PCI-Express 5.0 x4 interface combined with the E1.S 15mm form factor. The server backplane and CPU or chipset must provide a native PCIe 5.0 x4 lane to an E1.S connector; otherwise the drive will not be recognised or will fall back to a slower speed unsupported by this hardware.

Helstu kostir

  • 84TB capacity supports dense server workloads
  • E1.S 15mm form factor fits high-density chassis
  • PCIe 5.0 x4 interface enables fast data transfer
  • TLC memory components balance performance and endurance
  • Opal security protects stored data

Tæknilýsing

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PHV7X038TOP1
Form FactorE1.S 15mm
Capacity3.84TB
Memory ComponentsTLC
InterfacePCI-Express 5.0 x4
SecurityOpal
Sendingarþyngd0.12 kg
Stærð sendingar140 × 110 × 16 mm

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What server bay height does the E1.S 15mm form factor require?

The drive fits a standard E1.S slot with a 15mm vertical profile; verify your chassis supports that exact height before ordering.

Which PCIe generation must the backplane provide for the PCIe 5.0 x4 interface to operate at full speed?

A PCIe 5.0 x4 backplane is needed; inserting the drive into a PCIe 4.0 or 3.0 slot will limit throughput to that generation's ceiling.

How can I estimate when the TLC memory will reach its write endurance limit?

Use the drive's SMART health attributes — particularly media wear-out indicator and total bytes written — to track remaining life against your workload.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.