NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
16GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.20V operation for server stability
This 16GB DDR4 module targets administrators upgrading or repairing registered DIMM slots in servers and workstations that require ECC protection. It is not suited for desktop boards that accept only unbuffered memory or for systems limited to lower densities.
The module runs at DDR4 2400 (PC4-19200) with CL17 latency, 1.20V voltage, and a 2Rx8 registered ECC organisation on a 288-pin DIMM; matching these exact parameters is the only way to guarantee the system will recognise and stabilise the memory.
Align the single key notch on the 288-pin edge connector with the slot ridge, press firmly until both retention clips click, then verify in BIOS that the full 16GB appears at the rated speed. A common issue is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 2400 MT/s with CL17 latency, giving the memory controller a peak data rate of PC4-19200 per DIMM in a registered ECC configuration.
The 288-pin RDIMM uses a register to buffer address and command signals, allowing the platform to populate more slots without exceeding electrical loading limits at 2400 MT/s.
It fits a standard 288-pin DDR4 DIMM socket; the registered design adds a small buffer chip on the PCB but does not change the key notch position or module height.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?