NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
16GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.20V operation for server stability
This 16GB DDR4 module targets administrators upgrading or repairing registered DIMM slots in servers and workstations that require ECC protection. It is not suited for desktop boards that accept only unbuffered memory or for systems limited to lower densities.
The module runs at DDR4 2400 (PC4-19200) with CL17 latency, 1.20V voltage, and a 2Rx8 registered ECC organisation on a 288-pin DIMM; matching these exact parameters is the only way to guarantee the system will recognise and stabilise the memory.
Align the single key notch on the 288-pin edge connector with the slot ridge, press firmly until both retention clips click, then verify in BIOS that the full 16GB appears at the rated speed. A common issue is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 2400 MT/s with CL17 latency, giving the memory controller a peak data rate of PC4-19200 per DIMM in a registered ECC configuration.
The 288-pin RDIMM uses a register to buffer address and command signals, allowing the platform to populate more slots without exceeding electrical loading limits at 2400 MT/s.
It fits a standard 288-pin DDR4 DIMM socket; the registered design adds a small buffer chip on the PCB but does not change the key notch position or module height.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?