NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
16GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.20V operation for server stability
This 16GB DDR4 module targets administrators upgrading or repairing registered DIMM slots in servers and workstations that require ECC protection. It is not suited for desktop boards that accept only unbuffered memory or for systems limited to lower densities.
The module runs at DDR4 2400 (PC4-19200) with CL17 latency, 1.20V voltage, and a 2Rx8 registered ECC organisation on a 288-pin DIMM; matching these exact parameters is the only way to guarantee the system will recognise and stabilise the memory.
Align the single key notch on the 288-pin edge connector with the slot ridge, press firmly until both retention clips click, then verify in BIOS that the full 16GB appears at the rated speed. A common issue is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 2400 MT/s with CL17 latency, giving the memory controller a peak data rate of PC4-19200 per DIMM in a registered ECC configuration.
The 288-pin RDIMM uses a register to buffer address and command signals, allowing the platform to populate more slots without exceeding electrical loading limits at 2400 MT/s.
It fits a standard 288-pin DDR4 DIMM socket; the registered design adds a small buffer chip on the PCB but does not change the key notch position or module height.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?