NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
A-Tech
16GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.20V operation for server stability
This 16GB DDR4 module targets administrators upgrading or repairing registered DIMM slots in servers and workstations that require ECC protection. It is not suited for desktop boards that accept only unbuffered memory or for systems limited to lower densities.
The module runs at DDR4 2400 (PC4-19200) with CL17 latency, 1.20V voltage, and a 2Rx8 registered ECC organisation on a 288-pin DIMM; matching these exact parameters is the only way to guarantee the system will recognise and stabilise the memory.
Align the single key notch on the 288-pin edge connector with the slot ridge, press firmly until both retention clips click, then verify in BIOS that the full 16GB appears at the rated speed. A common issue is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 2400 MT/s with CL17 latency, giving the memory controller a peak data rate of PC4-19200 per DIMM in a registered ECC configuration.
The 288-pin RDIMM uses a register to buffer address and command signals, allowing the platform to populate more slots without exceeding electrical loading limits at 2400 MT/s.
It fits a standard 288-pin DDR4 DIMM socket; the registered design adds a small buffer chip on the PCB but does not change the key notch position or module height.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?