NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.
A-Tech
16GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.20V operation for server stability
This 16GB DDR4 module targets administrators upgrading or repairing registered DIMM slots in servers and workstations that require ECC protection. It is not suited for desktop boards that accept only unbuffered memory or for systems limited to lower densities.
The module runs at DDR4 2400 (PC4-19200) with CL17 latency, 1.20V voltage, and a 2Rx8 registered ECC organisation on a 288-pin DIMM; matching these exact parameters is the only way to guarantee the system will recognise and stabilise the memory.
Align the single key notch on the 288-pin edge connector with the slot ridge, press firmly until both retention clips click, then verify in BIOS that the full 16GB appears at the rated speed. A common issue is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 2400 MT/s with CL17 latency, giving the memory controller a peak data rate of PC4-19200 per DIMM in a registered ECC configuration.
The 288-pin RDIMM uses a register to buffer address and command signals, allowing the platform to populate more slots without exceeding electrical loading limits at 2400 MT/s.
It fits a standard 288-pin DDR4 DIMM socket; the registered design adds a small buffer chip on the PCB but does not change the key notch position or module height.
Także w tym dziale
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Waluta płatności i waluta wyświetlania cen.
Wysyłane z portfela przy kasie
Tylko podgląd — katalog wyceniony jest w dolarach
Brak pasującej waluty.
Wybierz język, w którym wyświetla się strona.
Pierwsza wizyta?
Konto już założone?
Nie ma automatycznego resetowania hasła: ten sklep nie wysyła żadnych e-maili, więc nie ma jednorazowego linku, o który można by poprosić. Adres pozostawiony przy koncie zostanie obsłużony ręcznie.
Zgłoszenie zapisane
Do skrzynki odbiorczej nic nie trafi — ten sklep nie wysyła żadnych e-maili. Zgłoszenia są obsługiwane ręcznie.
Hasło się przypomniało?