NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
ASRock
Micro-ATX board for 10th- and 11th-gen Intel CPUs with DDR4 up to 4800 MHz, HDMI, SATA 6.0 Gb/s, Gigabit LAN, Bluetooth 4.2 and Wi-Fi 802.11
The ASRock B560M-C is a micro-ATX motherboard built around the Intel B560 chipset for socket LGA1200 processors. It supports 10th and 11th generation Intel Core CPUs and provides four DDR4 slots with a maximum capacity of 128 GB. The board targets builders who need a compact foundation for a desktop system.
Rear I/O includes HDMI, USB 2.0, USB 3.2 Gen1 and a Gigabit LAN port driven by the Intel I219V controller. Internal headers supply three USB 2.0 headers for up to six ports, one USB 3.2 Gen1 header, two RGB and two addressable LED headers, plus dedicated CPU, water-pump and chassis fan connectors with smart speed control. A SPI TPM header and chassis intrusion header are also present. Buyers who need built-in Wi-Fi or Bluetooth 4.2 must add a compatible Intel module themselves.
The 8-pin Hi-Density 12 V connector feeds the CPU voltage regulators while the 24-pin ATX connector powers the rest of the board. Fan headers support PWM control so chassis and CPU fans can run quietly under light loads and ramp up when temperatures rise. Realtek ALC897 audio handles onboard sound. Builders who require higher overclocking headroom or more robust VRM cooling should consider boards with larger power phases.
Šiai prekei specifikacijos dar nepaskelbtos.
The board uses SATA 3 at 6.0 Gb/s for its storage interface, so connected SSDs or hard drives are capped at that bus speed.
An 8-pin 12V Hi-Density power connector is fitted on the board; the matching cable from the PSU must be plugged in for the processor to receive power.
The module fits into the board's M.2 Key-E slot and needs its two antenna cables attached before the bracket is screwed down; forgetting the cables leaves wireless non-functional.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?