NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ASRock
Micro-ATX board for 10th- and 11th-gen Intel CPUs with DDR4 up to 4800 MHz, HDMI, SATA 6.0 Gb/s, Gigabit LAN, Bluetooth 4.2 and Wi-Fi 802.11
The ASRock B560M-C is a micro-ATX motherboard built around the Intel B560 chipset for socket LGA1200 processors. It supports 10th and 11th generation Intel Core CPUs and provides four DDR4 slots with a maximum capacity of 128 GB. The board targets builders who need a compact foundation for a desktop system.
Rear I/O includes HDMI, USB 2.0, USB 3.2 Gen1 and a Gigabit LAN port driven by the Intel I219V controller. Internal headers supply three USB 2.0 headers for up to six ports, one USB 3.2 Gen1 header, two RGB and two addressable LED headers, plus dedicated CPU, water-pump and chassis fan connectors with smart speed control. A SPI TPM header and chassis intrusion header are also present. Buyers who need built-in Wi-Fi or Bluetooth 4.2 must add a compatible Intel module themselves.
The 8-pin Hi-Density 12 V connector feeds the CPU voltage regulators while the 24-pin ATX connector powers the rest of the board. Fan headers support PWM control so chassis and CPU fans can run quietly under light loads and ramp up when temperatures rise. Realtek ALC897 audio handles onboard sound. Builders who require higher overclocking headroom or more robust VRM cooling should consider boards with larger power phases.
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
The board uses SATA 3 at 6.0 Gb/s for its storage interface, so connected SSDs or hard drives are capped at that bus speed.
An 8-pin 12V Hi-Density power connector is fitted on the board; the matching cable from the PSU must be plugged in for the processor to receive power.
The module fits into the board's M.2 Key-E slot and needs its two antenna cables attached before the bracket is screwed down; forgetting the cables leaves wireless non-functional.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?