NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
ASRock
Micro-ATX board for 10th- and 11th-gen Intel CPUs with DDR4 up to 4800 MHz, HDMI, SATA 6.0 Gb/s, Gigabit LAN, Bluetooth 4.2 and Wi-Fi 802.11
The ASRock B560M-C is a micro-ATX motherboard built around the Intel B560 chipset for socket LGA1200 processors. It supports 10th and 11th generation Intel Core CPUs and provides four DDR4 slots with a maximum capacity of 128 GB. The board targets builders who need a compact foundation for a desktop system.
Rear I/O includes HDMI, USB 2.0, USB 3.2 Gen1 and a Gigabit LAN port driven by the Intel I219V controller. Internal headers supply three USB 2.0 headers for up to six ports, one USB 3.2 Gen1 header, two RGB and two addressable LED headers, plus dedicated CPU, water-pump and chassis fan connectors with smart speed control. A SPI TPM header and chassis intrusion header are also present. Buyers who need built-in Wi-Fi or Bluetooth 4.2 must add a compatible Intel module themselves.
The 8-pin Hi-Density 12 V connector feeds the CPU voltage regulators while the 24-pin ATX connector powers the rest of the board. Fan headers support PWM control so chassis and CPU fans can run quietly under light loads and ramp up when temperatures rise. Realtek ALC897 audio handles onboard sound. Builders who require higher overclocking headroom or more robust VRM cooling should consider boards with larger power phases.
Nicio specificație publicată pentru acest articol deocamdată.
The board uses SATA 3 at 6.0 Gb/s for its storage interface, so connected SSDs or hard drives are capped at that bus speed.
An 8-pin 12V Hi-Density power connector is fitted on the board; the matching cable from the PSU must be plugged in for the processor to receive power.
The module fits into the board's M.2 Key-E slot and needs its two antenna cables attached before the bracket is screwed down; forgetting the cables leaves wireless non-functional.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?