NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
ASRock
Micro-ATX board for 10th- and 11th-gen Intel CPUs with DDR4 up to 4800 MHz, HDMI, SATA 6.0 Gb/s, Gigabit LAN, Bluetooth 4.2 and Wi-Fi 802.11
The ASRock B560M-C is a micro-ATX motherboard built around the Intel B560 chipset for socket LGA1200 processors. It supports 10th and 11th generation Intel Core CPUs and provides four DDR4 slots with a maximum capacity of 128 GB. The board targets builders who need a compact foundation for a desktop system.
Rear I/O includes HDMI, USB 2.0, USB 3.2 Gen1 and a Gigabit LAN port driven by the Intel I219V controller. Internal headers supply three USB 2.0 headers for up to six ports, one USB 3.2 Gen1 header, two RGB and two addressable LED headers, plus dedicated CPU, water-pump and chassis fan connectors with smart speed control. A SPI TPM header and chassis intrusion header are also present. Buyers who need built-in Wi-Fi or Bluetooth 4.2 must add a compatible Intel module themselves.
The 8-pin Hi-Density 12 V connector feeds the CPU voltage regulators while the 24-pin ATX connector powers the rest of the board. Fan headers support PWM control so chassis and CPU fans can run quietly under light loads and ramp up when temperatures rise. Realtek ALC897 audio handles onboard sound. Builders who require higher overclocking headroom or more robust VRM cooling should consider boards with larger power phases.
Šai precei pagaidām nav publicētu specifikāciju.
The board uses SATA 3 at 6.0 Gb/s for its storage interface, so connected SSDs or hard drives are capped at that bus speed.
An 8-pin 12V Hi-Density power connector is fitted on the board; the matching cable from the PSU must be plugged in for the processor to receive power.
The module fits into the board's M.2 Key-E slot and needs its two antenna cables attached before the bracket is screwed down; forgetting the cables leaves wireless non-functional.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?