GUDGA GS 128GB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
GUDGA
A 2.5-inch SATA solid-state drive with 256GB capacity delivering up to 550MB/s reads and 500MB/s writes for faster boot and file transfers
Style 2.5"
The GUDGA GS-256 is a 2.5 inch SATA III internal solid-state drive built with 3D TLC NAND flash. It targets users upgrading a laptop or desktop that only accepts the 2.5 inch form factor and a SATA connection. The 256GB capacity provides space for the operating system and core applications.
The drive operates between 0°C and 70°C and can be stored from -20°C to 75°C. It runs on 5V power with no moving parts, so it produces no audible noise during operation. Sequential reads reach 550MB/s and writes reach 500MB/s while drawing minimal power. Endurance is rated at 150TB written and 1,000,000 hours MTBF.
Replacing a 2.5 inch hard drive with this SSD cuts boot time and application load time dramatically. The 7mm height fits most laptop bays and desktop trays without adapters. The jump is worth it when the system feels sluggish on a spinning disk and the motherboard lacks an M.2 slot for newer protocols.
| Brand | GUDGA |
|---|---|
| Series | GS-Series |
| Model | GS-256 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 256GB |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | 550MB/s |
| Max Sequential Write | 500MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 150TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
| Manufacturer Recertified | Yes |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
Mount the 7 mm drive in the 2.5 inch bay, connect the SATA data and power cables, then initialise and format the 256 GB volume in the operating system — the formatting step is the one people forget.
The 3D TLC NAND is rated for 150 TBW and 1,000,000 hours MTBF; no scheduled maintenance is required, but the drive should be replaced once the 150 TBW endurance limit is reached.
Sequential write speed peaks at 500 MB/s and the 150 TBW endurance budget is the first hard limit reached under continuous heavy write workloads.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?