SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
HP
A 2.5 inch SATA 6.0Gb/s laptop hard drive with 1TB capacity and 7200 RPM for server use
This HP 655710-B21 is a 1TB laptop internal hard drive spinning at 7200 RPM over a SATA 6.0Gb/s interface. It uses a 2.5-inch form factor with a maximum height of 15.7 mm and is supplied new. The drive is designed for server environments where cost and capacity are priorities.
It suits administrators adding non-mission-critical bulk storage to compatible 2.5-inch bays that accept a 15.7 mm drive height. It is not for buyers who need a thinner drive for slim laptops. It is also not for systems that require a 3.5-inch form factor or an interface other than SATA.
The single specification that determines compatibility is the 15.7 mm maximum height. Verify that the target chassis or drive cage accepts this dimension before purchase.
| Brand | HP |
|---|---|
| Model | 655710-B21 |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Features | The HPE SATA Hard Drives increase reliability and lower start-up costs without sacrificing reliability with non-mission critical hard drives at the lowest $/GB. Both cost and capacity optimized solutions provide up to 8 TB of storage in a single device. Available in 2.5-inch Small Form Factor (SFF) and 3.5-inch Large Form Factor (LFF) that are available in a wide variety of capacity points. Rotational Vibration Sensors deliver enhanced rotational vibration tolerance that provides enterprise class reliability in midline drives. 6 Gb/sec data transfer rate supporting existing servers. |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.7 mm |
| Width (maximum) | 75.7 mm |
| Length (maximum) | 118.6 mm |
The drive is supplied as a bare 2.5" SFF unit; any tray, caddy or mounting screws required by your server chassis are sold separately.
This model is the 2.5-inch Small Form Factor version with a 15.7 mm z-height, not the 3.5-inch LFF variant.
The 6.0 Gb/s link sets the bus ceiling; sustained transfer rates are determined by the 7200 RPM platters and will be lower than the interface maximum.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?