SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
HP
A 2.5 inch SATA 6.0Gb/s laptop hard drive with 1TB capacity and 7200 RPM for server use
This HP 655710-B21 is a 1TB laptop internal hard drive spinning at 7200 RPM over a SATA 6.0Gb/s interface. It uses a 2.5-inch form factor with a maximum height of 15.7 mm and is supplied new. The drive is designed for server environments where cost and capacity are priorities.
It suits administrators adding non-mission-critical bulk storage to compatible 2.5-inch bays that accept a 15.7 mm drive height. It is not for buyers who need a thinner drive for slim laptops. It is also not for systems that require a 3.5-inch form factor or an interface other than SATA.
The single specification that determines compatibility is the 15.7 mm maximum height. Verify that the target chassis or drive cage accepts this dimension before purchase.
| Brand | HP |
|---|---|
| Model | 655710-B21 |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Features | The HPE SATA Hard Drives increase reliability and lower start-up costs without sacrificing reliability with non-mission critical hard drives at the lowest $/GB. Both cost and capacity optimized solutions provide up to 8 TB of storage in a single device. Available in 2.5-inch Small Form Factor (SFF) and 3.5-inch Large Form Factor (LFF) that are available in a wide variety of capacity points. Rotational Vibration Sensors deliver enhanced rotational vibration tolerance that provides enterprise class reliability in midline drives. 6 Gb/sec data transfer rate supporting existing servers. |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.7 mm |
| Width (maximum) | 75.7 mm |
| Length (maximum) | 118.6 mm |
The drive is supplied as a bare 2.5" SFF unit; any tray, caddy or mounting screws required by your server chassis are sold separately.
This model is the 2.5-inch Small Form Factor version with a 15.7 mm z-height, not the 3.5-inch LFF variant.
The 6.0 Gb/s link sets the bus ceiling; sustained transfer rates are determined by the 7200 RPM platters and will be lower than the interface maximum.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?