SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
HP
A 2.5 inch SATA 6.0Gb/s laptop hard drive with 1TB capacity and 7200 RPM for server use
This HP 655710-B21 is a 1TB laptop internal hard drive spinning at 7200 RPM over a SATA 6.0Gb/s interface. It uses a 2.5-inch form factor with a maximum height of 15.7 mm and is supplied new. The drive is designed for server environments where cost and capacity are priorities.
It suits administrators adding non-mission-critical bulk storage to compatible 2.5-inch bays that accept a 15.7 mm drive height. It is not for buyers who need a thinner drive for slim laptops. It is also not for systems that require a 3.5-inch form factor or an interface other than SATA.
The single specification that determines compatibility is the 15.7 mm maximum height. Verify that the target chassis or drive cage accepts this dimension before purchase.
| Brand | HP |
|---|---|
| Model | 655710-B21 |
| Interface | SATA 6.0Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Features | The HPE SATA Hard Drives increase reliability and lower start-up costs without sacrificing reliability with non-mission critical hard drives at the lowest $/GB. Both cost and capacity optimized solutions provide up to 8 TB of storage in a single device. Available in 2.5-inch Small Form Factor (SFF) and 3.5-inch Large Form Factor (LFF) that are available in a wide variety of capacity points. Rotational Vibration Sensors deliver enhanced rotational vibration tolerance that provides enterprise class reliability in midline drives. 6 Gb/sec data transfer rate supporting existing servers. |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.7 mm |
| Width (maximum) | 75.7 mm |
| Length (maximum) | 118.6 mm |
The drive is supplied as a bare 2.5" SFF unit; any tray, caddy or mounting screws required by your server chassis are sold separately.
This model is the 2.5-inch Small Form Factor version with a 15.7 mm z-height, not the 3.5-inch LFF variant.
The 6.0 Gb/s link sets the bus ceiling; sustained transfer rates are determined by the 7200 RPM platters and will be lower than the interface maximum.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?